The IPR Socket for Ford Diesel is used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines. The Injector Pressure Regulator is located in a very tight location. This Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused.
Use with 3/8 inch square drive
It does not put torque on the connector in case it can be reused
Product Information Specifications for Lisle 68210 IPR Socket for Ford Diesel Below:
â€¢ Open Air Flow. Air flows freely through the chuck even though the tire valve is not engaged. â€¢ Works without a valve core.1/4" NPT (National pipe thread): â€¢ Pipe Outside Diameter (OD): 0.54" â€¢ Approx. Thread Length: 5/8" â€¢ Approx. Thread Length, Hand & Wrench: 3/8" â€¢ Thread Pitch: 0.05555555" â€¢ Tap Drill: 7/16" â€¢ Thread Density:18
Color: United States
Disconnects spring lock couplings on Ford and Chrysler AC lines. Works on fuel lines and other quick disconnect couplings on domestic and import vehicles. The handles are angled to access tight spots. Made of durable plastic that resists fuels and solvents. Available in six sizes as 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch. All disconnects available in individually skin-packed.
SPX OTC Oil Line Disconnect Tool is designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. It has metal construction for durability and precise OEM design. This tool is used on the Ford 6.0L diesel engine and is easy to use.
The Alltrade 10 piece Bearing Race and Seal Installer Kit separates fittings on automotive fluid lines, including AC, fuel, oil and transmission lines. Kit works on most late model GM, Ford and Chrysler vehicles. Includes single piece driver handle as well as 9 discs in the following sizes: 3.18 inch, 2.995 inch, 2.83 inch, 2.559 inch, 2.48 inch , 2.32 inch , 1.965 inch , 1.75 inch, 1.555 inch.
Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set
Easily disconnects air conditioning lines and quick connect fuel lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16 inch size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch.
Titan Fuel Line Disconnect Tool is useful for the fast and easy separation of quick disconnect style fittings. It is for use on both 5/16 inch and 3/8 inch fuel lines with quick disconnect fittings. It is necessary for fuel filter replacement and service on many late model vehicles. It is for use on many applications including: GM: 1989 through the current Ford: 1990 through the current Mazda: 1990 through current. It has slide card packaging.
11-1/2 inch flexible shaft. 4 tips: 4.5 millimeters and 1/4 inch. Hex sockets: double D socket and 3/32 inch hex bit. Applications include most GM vehicles and 1.7 to 2.2L Chrysler 1978 to present. Tips store in handle or plastic boot. Hex socket sizes: 4.5 millimeters and 1/4 inch. Socket size: double D. Hex bit size: 3/32 inch.
ABN Flexible Hose Clamp Pliers For Fuel, Oil, and Water
Manufacturer: Auto Body Now
Model: ABN 2021
Allows technician to access the flat-type hose clamps located in hard-to-access areas. Pliers has locking mechanism to hold clamp in the open position - makes removal and installation of clamp much easier. Heavy-duty 24" cable flexes to almost any position. Precision clamp on end of flexible cable allows for extended reach where other models cannot reach. Pliers can be locked, freeing up your hands and making your job easier and faster. Rubber dipped handle for extra grip.
OTC 6046 Heater Line Quick-Connect Release Tool for GM
The 0.75 inch (3/4) heater lines coming from the I.P. have quick connect style fittings. The access is very limited and the connectors have four tangs to depress at the same time. Slide J-43181 disconnect tool over the heater line. Clamp tool over line. Then press tool into the connector to release.