This Professional Fuel Injection Master Fitting Kit from OTC puts a full coverage fuel system service kit in your toolbox and greater service opportunities in your shop. This kit from OTC comes with an analog fuel pressure gauge preferred by professional service technicians giving precise pressure readings as well as a view of pressure sweeps during the testing analysis. The pressure testing manifold is designed with a bypass valve letting the technician perform basic fuel flow assessments. The 6550PRO has more adapters than any other kit weâ€™ve found giving the best coverage of any kit on the market. Domestic, Asian and European weâ€™ve got â€˜em. Each adapter works with schrader valve fittings to ensure user safety by preventing fuel spray when connecting or disconnecting the pressure gauge (included) the fuel line, or an accessory like a cleaning canister. All seals and o-rings in the 6550PRO from OTC are made with highly durable Viton material to prevent swelling or cracking when exposed to gasoline, alcohol blends and even the most aggressive injector cleaning chemicals. It comes with an application manual showing technical references for make/model/year, engine for vehicles produced between 1997 and 2008 inclusive. We include fuel Injection system, OE Fuel Pressure ranges, Fuel Pump Access point and disabling reference, OTC adapter reference and fuel line access locations for virtually full vehicle coverage.
Perform fuel pressure testing diagnose weak fuel pumps or restricted filters test for fuel flow and perform leak-down tests
0-100 pounds per square inch fuel pressure Gauge
47 OTC fuel injection system adapters each with a quick connect Schrader Valve
1997-2008 fuel injection service application manual
Replacement seal kit
Product Information Specifications for OTC 6550PRO Professional Master Fuel Injection Service Kit Below:
Tests electronic fuel injection systems on GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI, GM SCPI, Bosch 2 and GM MULTEC2 equipped vehicles. Set also contains: straight IAC signal tester for use on 1987 to current GM number 700 TBI and PFI fuel injection systems with flat 4 pin connectors. 90 degree IAC signal tester for use on 1982 to current GM TBI and PFI fuel injection system with square 4 pin connectors to current GM number 700 TBI and PFI fuel injection systems with flat 4 pin connectors. 90 degree IAC signal tester for 1982 to current GM TBI and PFI fuel injection system with square 4 pin connectors.
The OTC 7448A is designed for direct fuel rail and injection cleaning. Our recommended process runs your engine with a strong cleaning solvent, like OTC's 7000A Pro Inject-R Kleen (sold separately) - which is introduced directly into the fuel rail where maximum benefit is achieved. Debris that is loosened or dissolved is then combusted and ultimately removed through the vehicles exhaust system. It is machined from stainless steel hydraulic cylinder - has a 22 oz. capacity, and is able to handle pressures up to 30,000 psi. The full size cap makes adding solvents easy and spill proof. The 3-1/2" gauge makes setting the outlet pressure simple and accurate. Only a quarter turn is needed to open - or close the system. Our hose meets the SAE J30R9 standard for safe transfer of gasoline and ethanol blended fuels. Our hose is removable which improves storage options and if inadvertently damaged - very easy to replace. To improve performance life, we added a "blowout" attachment so any residual solvent can be removed from the hose with shop air supply. Finally, we include our Fuel Injection Application Manual 6550MAN-13. This accessory is packed full of pertinent information for gasoline powered vehicles from 1997 to 2013 model years and is ONLY available from OTC. We give you Fuel Pump Disconnect points, Fuel Rail Break-in points, OE fuel pressure specs and the correct OTC adapter required. For full coverage adapter sets see OTC 6550PRO - sold separately. If your vehicle fails to sta...
This fuel injection cleaner connects directly to your shop air supply. When used with recommended solvents it will clean injectors more effectively than aerosol methods. Includes the gauge, hose, instructions and a tools and techniques manual.
Iglobalbuy Fuel Injection Diesel Pump Pressure Gauge Tester Gasoline Test Meter Tool 145psi
Specifications: Professional quality Large dual reading gauge in both PSI and BAR Pressure release valve and drain hose Hanging hook on gauge Adapters, fittings and hoses for modern Schrader test port fuel injection systems For petrol and low pressure diesel Package Included: 1x Diesel Pump Pressure Tester Set
The OTC 6550MAN-13 features over 200 pages of valuable fuel system service information for professional technicians. English, Spanish and French translations for safety precautions and fuel system, adapter, and tool identification. General operation instructions PLUS 1997 to 2013 Make/Model/Year data points for fuel pressure specifications, fuel pump disabling location and procedure, OTC adapter reference and adapter 'break-in" location.