Lisle 36050 Valve Keeper Remover and Installer Kit
Color: United States
Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly. To install keepers, load in retainer on valve stem, then push or tap handle to install. Can be used on the car or bench. New smaller size works on Toyota four cylinder and Chrysler New World Engine applications.
Biltek Valve Spring Compressor C Clamp Service Kit Auto Motorcycle ATV Small Engine New Heavy Duty 5 Sizes Valve Spring Compressor Pusher Tool Car & Motorcycle Repair
Heavy-Duty Motorcycle & Small Engine Valve Spring Compressor. Comes with five spring compressor adapters and two posts (with thread length 70mm and 90mm)Features:Heavy-Duty Motorcycle & Small Engine Valve Spring CompressorAdjustable design works on a wide variety of machinesSteel Construction complete with Carrying CaseSpecifications: Max Jaw Opening: 9-1/2" Condition: 100% Brand NewIt will compress valves for the following sizes: 1) Size: 30mm (OD.) - 27.5mm (ID.)2) Size: 25mm (OD.) - 23.5mm (ID.)3) Size: 23mm (OD.) - 21.5mm (ID.)4) Size: 19mm (OD.) - 16.5mm (ID.)5) Size: 16mm (OD.) - 13.5mm (ID.)Threaded Post Lengths: 70mm, 75mm, 115mmPackage Includes: 1x Valve Spring Compressor C Clamp5x Spring Compressing Adapters3x Threaded Posts1x Rod1x Carrying CaseInstructions not included
ABN Volvo Camshaft Crankshaft Engine Alignment Timing Locking Fixture Tool Set Kit
Manufacturer: Auto Body Now
ABN Crankshaft Camshaft Engine Alignment Timing Locking Tool Volvo Fixture KitÂ ABN Volvo Camshaft Crankshaft Engine Alignment Tool Timing Set Kit for (4), (5), (6) Cylinder EnginesThis ABN Volvo Camshaft/Crankshaft Kit is designed for alignment of the cam and crankshafts on Volvo vehicles. It also enables the correct installation of the camshafts with the cam cover. This master set is designed to properly secure and align the cylinder head, cam, and crankshaft during the removal and installation of cylinder head assemblies on (4), (5), and (6) cylinder engines.Â Applicable for Volvo models: 850, 960, S40, S70, and S90.Â Master Set for Crankshaft, Crankshaft, and Timing AlignmentPrecision ade fitting to ensure proper alignmentWorks with Volvo Models: 850, 960, S40, S70, and S90For either (4), (5), and (6) Cylinder EnginesFormed Carrying Case for Tool Protection
Remove valve springs on most cars with overhead valves without removing the cylinder head. Offset jaws grip the valve spring in parallel compression. Tool maintains constant length as spring is compressed. Use with 901 or 2992 Air Hold Fittings to keep valve in place. Caution: wear eye protection. Vehicle must be placed in park/neutral before applying air pressure, otherwise vehicle may move.
Seal Removal Tool removes valve stem seals on overhead camshaft engines. Pliers nose has serrations in the tip for improved grasp on seals. Extra Long neck designed to reach into confined area of the seal to grip it for removal. Works with OEM and aftermarket seals regardless of their configuration. Narrow Access Design for tight work. Made from quality steel. Durable commercial use tool Size: 9.8"L x 1.8"T x 3/4"W (250mm x 46mm x 18mm)