Removes the inserts on upper control arm alignment brackets. Services 1989-2001 Chevrolet and GMC 1/2- 3/4- and 1-ton 2- and 4-wheel drive trucks and 1990-2002 all-wheel drive Chevrolet Astro and GMC Safari vans. New improved design has a self-centering knock-out for full punch removal with less tear.
Removes the inserts on upper control arm alignment brackets
New and improved design has a self-centering knock-out for full punch removal with less tear
Services 1989-2001 Chevrolet and GMC 1/2 3/4 and 1-ton 2 and 4 wheel drive trucks and 1990-2002 all-wheel drive Chevrolet Astro and GMC Safari vans
Lifetime limited warranty
Product Information Specifications for OTC 7491C Upper Control Arm Knock-out Tool Below:
High quality chro-moly alloy steel.Extra-thin wall deep length impact sockets for removing/installing transmission and differential and yoke locknuts* on a wide variety of trucks. Weight: 4.2 lbs.Lifetime Warranty. Image shown may not be actual product but represents product. DIMENSION INCHES A: 2.99 B: 3.42 C: 3 D: 1.02 E: 4.1 Grey Pneumatic 3784D 3/4" Drive x 2-5/8" Deep Length Truck Pinion Locknut Impact Socket
Heavy Duty Overdrive Spring Compressor A500 and A518/A618
Heavy Duty Overdrive Spring Compressor 88-up A500, 42rh, 42re, 44rh, 44re and '91-up A518, 46rh, 46re, A618, 47rh, 47re T-1302AC is laser cut from 1/4" steel. The (3) vertical bars are welded in place using much stronger mortise-and-tenon joints; finished cleanly by machining them smooth. As a final touch we've anodized it for corrosion protection (and good looks). We've built it plenty tough enough to withstand a lifetime of usage. Over 15x stronger than it needs to be. In testing, it didn't fail until over 8 tons of pressure had been exerted on it! American made! Our high-volume materials purchasing and manufacturing power combine to keep the costs low. Tool distributors can now sell these at or near the price they've paid for previous market offings.
KD2078 Features: -Spring compressor. -Used to remove valve springs on most cars with overhead valves. -Tool maintains constant length as spring is compressed. -Use with KDT901 or KDT2992 air hold fittings to keep valve in place. Product Type: -Tools. Use: -Strut. Quantity: -Single. Make: -Universal. Generic Dimensions: -Product weight: 0.95 lb. Dimensions: Overall Product Weight: -0.95 Pounds.
Adapt-A-Case Pinion Shaft Removal Tool Kit VW 095 096 01M Transmission T-7500AC. T-7500AC VW 095 096 01M Beetle, Jetta, Golf, Passat Pinion Shaft Removal Tool Kit What once seemed impossible is now quick and easy! Servicing of the pinion shaft seal, cone bearing and race has now been simplified. The biggest challenge has been to remove the threaded aluminum pinion retainer (which also houses the pinion seal). This piece is torqued to approximately 150 lbs ft. and is located deep in the case. T-7500AC's spanner socket, which accepts a 1/2" drive, makes this near effortless. Once the support is removed, the included adapter fits slide-hammers (with 3/4-16 thread pitch) and threads onto the pinion shaft. A few taps and the shaft pulls the race out of the case! The pinion shaft is now free to either service the bearing and race or to replace the shaft. T-7500AC is a tough tool kit that enables you to perform a more complete rebuild. No more crossing your fingers hoping it won't come back with a final drive problem!
Differential Tools from Yukon Gear and Axle are designed specifically for differential work to help you complete your repair, restoration or upgrade. If you work on differential systems, these are the industry trusted tools you need for your shop or garage.