The INFICON TEK-Mate Refrigerant Leak Detector incorporates an electrochemical sensor consisting of a ceramic substrate, doped with a reactive element, and maintained at high temperature by a built-in heating element. When a halogen-bearing gas contacts with the hot surface, the chlorine, fluorine, or bromine atoms are separated from the molecule and ionized. This causes an electrical current to flow within the ceramic to a collection electrode at the center. Careful selection and application of the ceramic permits the INFICON sensor to provide similar responses to CFCs (such as R11 and R12), HCFCs (such as R22 and R123), HFCs (such as R134a) as well as replacement blends (such as R404A and R410A) so that the operator need not determine the refrigerant in use, nor remember to set a selector switch. Furthermore, when searching for HFCs, the instrument does not have an exaggerated response to traces of chlorine bearing vapors which are frequently present.
Includes Sensor, 2 D Batteries, Filters, Carrying Case
Rugged flexible metal probe
Low battery indicator
High/low sensitivity selector and power in one switch
Variable intensity audible signal and single flashing LED help locate leaks fast
Product Information Specifications for Inficon TEK-Mate 705-202-G1 Refrigerant Leak Detector, R22, R410A, R134A Detects Below:
Features 10 sensitivity ranges, LED display, automatic calibration, low battery indicator, 18" flexible probe. Includes: ear phones, case, extra sensor and 4 AA batteries.Features:Variable Sensitivity: The only portable refrigerant leak detector with 10 different sensitivity ranges for effectively locating all refrigerants, large or small. At the lowest sensitivity setting, the LS790a can detect an HFC-134a leak as small as 1/2oz. (15grams) per year. At the highest sensitivity setting, the unit can detect an HFC-134a leak as small as 1/4oz. (10grams) per year. Clear: Clears the memory in the microcomputer and recalibrates to ambient. Lock-Out: Selects Lock-Out mode; measuring and recording the highest level detected by the Ion-Pump. The alarm sounds a two-tone signal and the visual display flashes when the recorded high has been detected, "locking out" all background contamination. Alarm Select: Selects audible alarm, visual indicator, or both. Visual Indicator: 10 position moving LED display indicates varying halogen concentrations. As the concentration increases, the LED moves left to right. In the Lock-OutT mode of operation, the LED's flash only at the leak source. Low Battery Indicator: The low battery LED constantly illuminates at half brightness when batteries are low. 18" Flexible Probe: The metal cable probe easily twists and turns into otherwise inaccessible areas. You're in and out in less time, with no coiled cord to tangle. Power Saver: Automati...
The Inficon 712-700-G1 power stick is a replacement unit for Inficon Compass and D-TEK CO2 refrigerant leak detectors and contains a rechargeable NiMH battery that provides at least five hours of operation when fully charged. Its wire leads with miniature electrical connector attach to the leak detector's circuit board and charge via the leak detector's AC adapter. The power stick requires ten hours charging time when newly installed or fully depleted. It does not need to be fully charged to operate or fully discharged to recharge since it will charge while the leak detector is operating on AC power. Inficon manufactures gas analysis, measurement, and control equipment in refrigeration, utilities, emergency response, lighting, and research and development. The company, founded in 2000, is headquartered in Bad Ragaz, Switzerland.
The R134A A/C Valve Core Remover/Installer is excellent for replacing valve cores without discharging the system and for speeding recovery and recharging large systems. It features a built-in ball valve that retains charge and allows access to the air conditioning system.
The world's most popular and professional injection method. Pull the trigger to inject a precise amount of dye into the A/C system and you're done. Services up to 64 vehicles. Includes R-12 and R-134A adapters, universal A/C dye cartridge (8 oz./240ml), SAE-J2297 certified and OEM approved dye and service stickers. Lifetime warranty on every injection gun.
Interdynamics GM dex-cool engine coolant UV leak detection dye. Safe for use in all 1996 and newer GM makes and models that use dex-cool coolant. Compatible with all brands of GM dex-cool style coolant to help locate leaks.
A/C Leak Freeze permanently seals air conditioner and refrigerant system leaks in home and commercial HVACR applications. A/C Leak Freeze is compatible with all standard refrigerant gases. It's polymer-free, tested to be non-clogging to the A/C compressor and recovery unit - it's a permanent fix. Leak Freeze Tech Tips. â€¢ Be sure to FULLY attach the reusable adapter to the low side ONLY. â€¢ Do not allow time to elapse once the system is running. Quickly, inject the product. â€¢ Recharge the system AFTER injecting AC LeakFreeze. â€¢ A caulk gun is helpful when pushing the product in the systems with high pressure on the low side. Insert entire syringe into sleeve of caulk gun and slowly ratchet down on top of the plunger. Always keep your free hand on top of syringe for stability. â€¢ AC LeakFreeze will not cause any damage to gauges. â€¢ When system pressure is high, particularly in R410a and R22 applications, we recommend putting the system in a shallow vacuum to alleviate low side pressure Features Permanently seals leaks in air conditioning and refrigeration systems Will continue to seal additional Leaks for up to 1 year that meet testing specifications Does not contain polymers Not activated by moisture or oxygen Tested to be non-clogging to a/c compressor and recovery unit Ideal for preventive maintenance and leak protection Can be mixed with refrigerant gas: R11, R12, R13, R14, R22, R23, R123, R124, R134a, R141b, R404a, R407c, R410a, R502, ...