GearWrench 3312D Inner Tie Rod Separator 21/32" Length 12"
Manufacturer: KD Tools
Brand: Apex Tool Group
KDT3312 Features: -The inner tie rod can be removed and installed without removing the rackRemoves and installs inner tie rods on many GM and some Chrysler products that do not have a hex inner end nut, but use 2 flats that measure 1-7/16" across.. Product Type: -Pullers/Separators. Use: -Tie Rod. Quanitity: -Single. Generic Dimensions: -Allows for use on all inner tie rods with 1-3/16" and 1-5/16" hex sizes. -Tie Rod Separator 21/32'' Length 12''. Dimensions: Overall Height - Top to Bottom: -2.5 Inches. Overall Width - Side to Side: -3.1 Inches. Overall Depth - Front to Back: -17.6 Inches. Overall Product Weight: -2.45 Pounds.
Manufacturer: Tiger Tool International
Brand: Tiger Tool
Provides ultimate brute strength for disassembling even the most seized U-joints in minutes on virtually all cars, light-duty trucks, and farm machinery. NOTE: Damage to flange style yokes may occur if bearing cups are severely seized. Not compatible with Double Cardan joints.
The OTC 7500 replaces existing products with multiple adapters. Its unique cam design covers sizes from 33 to 41 mm hex, 2 flats, round or any style rack ends. Since the wrench fits all the way to the inner side of the tie rod link it makes it easy for the technician to unscrew the tie rod link for replacement.
7" Shutter Dogs (set of 2) S-Hooks Holdbacks window Hardware black
Set of 2 S Hook Shutter Holdbacks complete with attachment hardware (lag bolts, washers and non-rattling springs). 1 Set provides all hardware needed for 1 window set of shutters. Once installed, the S Hook will protrude 1 3/8" from the house wall and pivot to "hold" shutter. Thanks for making HH Specialty a part of your home project!
K Tool International KTI76000 Nylon Tie Tightening Tool
Manufacturer: K Tool International
Brand: K-Tool Corporation
KTI76000 Features: -Grips nylon cable ties and tightens with very secure grip. -Also cuts excess with thumb lever. -Wire Tie Tightening Tool. Product Type: -Tools. Use: -Wiring. Quanitity: -Single. Dimensions: Overall Height - Top to Bottom: -0.7 Inches. Overall Width - Side to Side: -4.6 Inches. Overall Depth - Front to Back: -8.8 Inches. Overall Product Weight: -0.55 Pounds.
The OTC 6529-6 Import Car ball joint adapter set includes 15 adapters to remove and install ball joints. All the adapters needed to work on upper and lower ball joints on 1996â€“2008 Toyota, Hyundai, Kia, Infinity, Saab, and Nissan cars with press in ball joints. Vehicle application chart and diagrams are included. Does not include the 7248 C-frame press, which needs to be purchased separately.
DIY Leaky Basement Wall Crack Repair Kit (20 ft.) with Removable Surface Seal-n-Peel for Homeowners - Repair Poured Concrete Foundation Wall Cracks, the Waterproofing Contractor's Preferred Solution
Manufacturer: Emecole, Inc.
NO RISK, MONEY BACK GUARANTEE - The Emecole Leaking Basement Crack Repair Removable Seal-n-Peel Kit for Homeowners provides an effective, user-friendly and low cost solution for permanently repairing leaking concrete cracks in poured basement foundations, while providing a cleaner appearance afterwards. With the use of a standard caulk gun, this kit is equipped with the components to repair up to 20 feet of cracks, from hairline thin to as wide as 3/16". Upon injection into the crack, our two-component Emecole 102 Premium Polyurethane expands up to approximately 20 times its initial volume to completely fill voids between the foundation and the soil, resulting in a non-shrink closed cell foam barrier that prevents further water entry. Its flexibility allows it to expand and contract with any foundation movement due to freeze and thaw cycles. Upon curing of injected material, applied Surface Seal Paste and Ports easily peel off the wall, leaving a cleaner, more optimal finish on basement wall. Includes step-by-step instructions applicable for first-time concrete crack repair applicators or seasoned veterans. The low pressure injection process for poured foundation crack repair was pioneered by Emecole founder Lou Cole dating back to 1987, and quickly became the preferred process by concrete and basement waterproofing contractors. Backed with our no risk money back guarantee, this proven method will permanently solve your leaking basement wall crack problem, stopping further ba...
The OTC 7704 is used with ball joint service set Nos. 6530, 7248, and 7249 to remove and install upper and lower ball joints on 1967 to 1992 1/2- and 3/4-ton 4WD vehicles fitted with Dana 44 front axles (found on Ford Dodge GM International and Jeep vehicles).
inner tier rod tool set These tools are specially designed for the inner tie rods that are inaccessible to adjust. The inner tie rod can be easily removed and installed by slipping the long socket over the tie rod end and connecting it to the open-jaw driver. includes: 14mm Open Jaw Driver 17mm Open Jaw Driver . 33.6mm Open Jaw Driver 1-3/16" Open Jaw Driver 1-1/4" Open Jaw Driver 1-5/16" Open Jaw Driver 1-7/16" Open Jaw Driver Long Socket blow mold case for storage.