The battery voltage instructions: The lights which on the front of panel used in warning leakage and battery voltage instructions. Green - battery voltage normal, suitable for work;Orange - battery voltage close to the limit, need to work as soon as possible replacement Boot reset/automatic follow circuit: Boot reset: this instrument after startup, can automatically adjust to within 6S ignore probe existing circuit, enter detection concentration level the refrigerant state, if users in leakage source can be conveniently near boot, looking for higher levels of the leakage source. The device also moved to clean the air can be powered by adjustment to maximum sensitivity, than zero concentration level, right now the leakage can be detected. automatic follow circuit: in this instrument in detection condition, automatic circuit will follow the environment changes, the gas concentrations of halogen to prevent false-negatives. Leakage warning:When the gas leakage are discovered, "di di" sound will become more hurried, leakage, "di di" sound more rapid. Meanwhile lights flash.
Performance index: Working temperature: 0 Â°C ~ 52 Â°C. Maximum sensitivity: 6gr/yr(halogen refrigerants). Battery life: about 50 hours under normal use. response time: instantaneous Square type: unlimited TanGan length: 20cm (7.87 inches) Feet inch: 22.9 cm x 6.5 cm x 6.5 cm (9.01 x 2.56 x 2.56 inches). Preheating time: about 6 seconds. Reset the time: 2-10 seconds. Electricity source: 6v DC, 4 x AAA batteries.
Package includes 1 x Instruction manual 1 x Carrying pouch 1 x Halogen leak detector with probe
Excellent sensor with maximum sensitivity of 6gr/yr, the Freon leak detector detects all kinds of halogen refrigerants including but not limited to R11, R12, R500, R503, R22, R123, R124, R502, R125, R134a, R404a
Real time sensitivity, refrigerant Freon leak detector can be automatically adjusted to the best optimum detecting state
Flexible probe can reach to almost any awkward corners or space
Tricolor display of battery voltage; Siren sound and flashing light for the leak alarm indicator
More stable gas leak detector with precise ultra-low power IC design
Product Information Specifications for LotFancy Refrigerant Freon Leak Detector for HFC CFC Halogen R134a R410a R22a Air Condition HVAC Below:
Manufacturer: Standard Plumbing Supply
The SRL8 Heated Diode Refrigerant Leak Detector is designed exclusively to make the HVAC/R Technician's job easier, faster, safer and more efficient. We set out to develop the best heated diode leak detector for HVAC/R. We believe the SRL8 is it. It comes in kit form in a rugged, blow-mold case with all of the extras you don't get from the other guys.
Signstek Portable AC Refrigerant Halogen Gas Leakage Detector Tester with High Sensitivity for Home Use
The Signstek HLD-100+ gas leakage detector is used to detect halogen gas leakage,designed with high sensitivity and stable function, is the most reliable negative corona halogen leak detector at present. Functions: A: Detect leaks in air-conditioning, freezing systems and responds to ALL halogenated (containing chlorine or fluorine) refrigerants, including: *CFCs: R12, R11, R500, R503etc. *HCFCs: R22, R123, R124, R502etc. *HFCs: R410a,R134a, R404a, R125 etc. B:Detect Ethylene Oxide gas leaks in hospital sterilizing equipment. C:Detect SF-6 in high voltage circuit breakers. D:Detect most gases that contain Chlorine, Fluorine, and Bromine (halogen gases). E: Detect cleaning agents used in dry cleaning applications. F. Detect halogen gases in fire-extinguishing system. Specifications: Maximum sensitivity: 0.1 oz/yr (3g/yr) for all halogen refrigerants Working Mode: Continuous and no limit Reaction time: Instant Resetting time: 2 seconds Warm-up time: About 6 seconds Sensor tip life under continuous operation: More than 50 hours in normal detecting status Power Supply: 3V DV, Two-cell C Alkaline batteries Probe length: 14" Dimension: 9 1/2" x 2 1/2" x 2 1/2" Weight: 0.6kg Important Note: Reset function: before using this product every time,please be sure that press Reset Button for 1 second in fresh air, the direct light will become orange for 2 second, means that you complete the reset function,then you can continue to use it. Signstek is a registered tra...
Excellent method for adding refrigerant oil or large amounts of UV leak detection dye to the A/C system. Add oil by allowing vacuum to pull it in after the evacuation process, or use refrigerant to push it in using the recharge system. Rugged all metal 2 oz. canister. The standard models use a needle style valve attached between the manifold gauge set or charging equipment and A/C hose. 13mm-M x 13mm-F Low-Side Coupler (R134a).
AGPtekÂ® Portable AC Refrigerant Gas Leakage Detector Leak Tester with high sensitivity 3g/yr (0.1oz/yr)
Applications: 1. Detect leaks in air-conditionings, freezing systems and responds to ALL halogenated (containing chlorine or fluorine) refrigerants, including: CFCs: R12, R11, R500, R503etc. HCFCs: R22, R123, R124, R502etc. HFCs: R410a,R134a, R404a, R125 etc. 2. Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas). 3. Detect SF-6 in high voltage circuit breakers. 4. Detect most gases that contain Chlorine, Fluorine, and Bromine (halogen gases). 5. Detect cleaning agents used in dry cleaning applications such as perchloroethylene. 6. Detect halogen gases in fire-extinguishing system. Specification: Maximum sensitivity: 0.1 oz/yr ( 3g/yr ) for all halogen refrigerants Working Mode: Continuous and no limit Working temperature: 0?~52? Reaction time: Instant Resetting time: 2 seconds Warm-up time: About 3 seconds Sensor tip life under continuous operation: More than 50 hours in normal detecting status Power Supply: 3V DV, Two-cell C Alkaline batteries (Not include) Probe length: 14" Overall Dimension: 9 1/2" x 2 1/2" x 2 1/2" IMAGEÂ® - is a registered trademark protected by the US Trademark Law. IMAGEÂ® products are sold by authorized sellers BrainyTrade only.