MTN9001 Features: -Can also be used to pull bearings or bushings from generators or starters. -Strength - helps pull out tough bearings. -Short length - allows reach into tighter areas. -Versatility - works on automobiles, trucks, and tractors. Product Type: -Pullers. Use: -Pilot Bearing. Quanitity: -Single. Generic Dimensions: -Only 7 1/2'' long. Dimensions: Overall Height - Top to Bottom: -2.6 Inches. Overall Width - Side to Side: -5 Inches. Overall Depth - Front to Back: -6.3 Inches. Overall Product Weight: -2.3 Pounds.
Manufacturer: Sunex International
SU52BS Features: -For use with 20, 40 and 50 ton shop presses. -Adjustable size. -Provides a stable base for bearing work. -Can be used for other applications with shop press. Dimensions: Overall Height - Top to Bottom: -3 Inches. Overall Width - Side to Side: -3.5 Inches. Overall Depth - Front to Back: -9.25 Inches. Overall Product Weight: -5.35 Pounds.
Cal-Hawk Small Bearing Separator Remover Splitter Puller Removal Tool
Manufacturer: Cal Hawk Tools
Features:Solid steel, black oxide finishDesigned for use on jobs where space does not permit the use of puller jaws directly behind the part to be removedCapacity: 2-1/4"Length: 4"Threads: 3/8" (16 TPI)Get it quick, they wont last long at this price!
OTC 4532 7-Ton Multi Purpose Bearing and Puller Set
The OTC 7-Ton Multi Purpose Bearing and Puller Set offers a bearing or pulley tool solution featuring a classic 'H inch Bar style puller block accomillimeterodating 7 inch to 11 inch application spread. It comes with 2 sets of forged jaws for a pulling reach range of 5 inch to 9 inch and is tempered for heavy-duty applications and two forcing screws are included for short and long pulls. Where a push puller is the best pulling choice when threaded holes are not available, the 4532 provides technicians and shops with a solution for many applications like heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers. Deep set transmission gears and A/C clutches. Roller gears on tracked vehicles, locking collars on pivot shafts.
The "Pilot Bearing Pulling Attachment" allows you to remove pilot bearings, thrust washers and smaller bearings hidden in a shaft or housing. It works with both 5/8 â€ 18 as well as M18 - 1.5 threaded hammer shanks. The jaws require a minimum of 5/8 inch opening and can range up to a maximum of 1â€1/2 inch diameter. This spread is actuated by simply turning the head of the attachment.
Pump Pulley Remover Straight Type Two Claws Bearing Puller Hand Tool
Designed and built to give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps. Position jaws over pitman arm and turn center screw to free pitman arm. The attached jaws fit over the flange and are locked into position by adjusting thumb screws. Great for car, truck or other vehicles repairing use.
uxcellÂ® 75mm Length Center Bolt Two Jaws Bearing Gear Puller
Color: As Picture Shown
Designed and built to give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps. Position jaws over pitman arm and turn center screw to free pitman arm. The attached jaws fit over the flange and are locked into position by adjusting screws. Great for car, truck or other vehicles repairing use.