Sanden Clutch & Pulley Removal Jaws

Manufacturer: Ram Brand: Ram Clutches Model: 03-048

Step up to a RAM steel alignment tool for your clutch installation. Plastic tools are inaccurate and can cause difficulty upon reinstallation of the transmission. RAM steel alignment tools are precision machined for an exact fit and ease of installation. The open ended design makes it possible to progressively load the clutch pack without having to juggle the parts in your hand while assembling to the flywheel. These are especially helpful when installing multiple disc clutches.

Manufacturer: BikeMaster Brand: BikeMaster Color: Black

Very soft "closed cell" foam sleeve.

Manufacturer: Pioneer Brand: Pioneer Model: TAT-5332

CLUTCH ALIGNMENT TOOL

Manufacturer: Great Neck Saw Brand: OEMTOOLS Model: 27002

The OEM A/C Clutch Plate Remover Shoe Tool is ideal for GM A6 and R4 compressor clutches. Simply screw into clutch and turn pressure screw to remove.

Manufacturer: Builders World Wholesale Distribution Brand: AmPro Model: T70131

The AMPRO T70131 Truck Clutch Alignment is 1 1/2 inch outside diameter, and has 30 millimeters pilot. The AMPRO T70131 Truck Clutch Alignment is an effective tool for aligning and installing truck clutch pressure plates. It is made of strong and light fiberglass reinforce nylon. The 10 splines position the plates precisely as the nylon body allows for easy extraction of the tool once the plates are in position.

Manufacturer: ACE Brand: QBace

This kit contains all the tools necessary to assemble and time the VANOS cam-timing units on BMW M52TU . M54 and M56 6-cylinder engines utilized from 1998 onwards. Alignment Jig Adjusting plate for setting valve timing on engine with double Vanos. Sprocket Assembly Jig for pre-assembling secondary chain sprockets with chain on camshafts. Chain Tensioner Lock Pin locks chain tensioner during timing. VANOS Compressed Air Connector use to pressurize the single and double Vanos unit when servicing. Applicable to 6 cylinder engines M52TU - 1998-2000 . M54 - 2001-2004 . M56 - 2003 to present.

Manufacturer: Great Neck Saw Brand: OEMTOOLS Model: 27000

The OEM A/C Clutch Holding Tool holds the compressor clutch in place when removing holding bolt by adjusting pins to fit holes in clutch. This tool prevents the clutch plate from turning when moving the shaft nut. The adjustable three-stud design is meant for GM R-4 compressors, but the wrench will also fit other GM, Pitts, Warner, and Ogura clutches.

Manufacturer: Assenmacher Specialty Tools Brand: Assenmacher Specialty Tools Model: BMW 400

AHBMW 400 Features: -Fits over square on back of camshafts. -For setting camshaft timing. -Camshaft Alignment Tool. -Made in the U.S.A. Product Type: -Tools. Use: -Camshaft. Quantity: -Set. Dimensions: Overall Height - Top to Bottom: -2.2 Inches. Overall Width - Side to Side: -2.2 Inches. Overall Depth - Front to Back: -2.2 Inches. Overall Product Weight: -4.1 Pounds.

Manufacturer: Allstar Performance Brand: Allstar Model: ALL14290

Splined, high-impact plastic tools are helpful when aligning the clutch disc on the flywheel for proper insertion of the transmission input shaft.