This unit has a built in purge circuit which eliminates the need for external equipment and makes for easy clearing at the end of the job. It has superior condenser performance which means the recovery tank stays cooler for a longer period of time, allowing you to recover more refrigerant without high-pressure cut-out. And it's simple to operate, too, with a single valve, single gauge control panel.
This special filter fitting is used inline between the tank fill hose and the virgin refrigerant tank to help prevent any tank debris from getting inside the A/C RRR machine. Simply screw the filter fitting onto the tank, and then connect the tank fill hose to end of the fitting. Instructions are included that tell the user how to install the fitting and how to clean the filter when necessary.
' Refrigerant Recovery Unit, 2-Port, Height (In.) 13-3/4, Depth (In.) 16-1/8, Width (In.) 10-1/4, NEMA 5-15P Male Plug Electrical Connections, Hose Connection 1/4 In. Male, Motor HP 1, Voltage 120, Operating Temp. Range (F) 32 Degrees to 104 Degrees , Requires Recovery Tank and Refrigerant Scale, Oil-Less, Air-Cooled Compressor, For Use With Category III, IV and V Refrigerants Only, No Explosive, Flammable or Corrosive Coolants '
Nu-Calgon 4300-11 - Rx11 Line Set Flush 2 lb. Canister
Brand: Nu Calgon
Rx11-flush has been the industry's standard for over a decade and contractors agree, it's the best flush for R-410A retrofits and after compressor burnouts. Benefits: Low Boiling point enhances complete evacuation of flush. No oily residue left behind. Safe, nontoxic, and nonflammable. Formulated with patented solvent technology. Approved as part of the U.S. EPA's Significant New Alternatives Policy (SNAP) Program. Over a decade of proven success. Convenient pressurized package sizes. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. Rx11-flush, pioneered by the same chemists who produced the original R-11. Rx11-flush offers all of the benefits of R-11 without the environmental concerns.It dries quickly, has a low boiling point (106F) and will not attack components. Additionally, with the advent of 13 SEER equipment and the retrofit to R-410A equipment, Rx11-flush is the ideal solution for flushing line sets.
TIF 9020A Slimline Refrigerant Scale, 200 Pound Capacity Â TIF 9020A Slimline Refrigerant Scale Ã— TIF 9020A 200 pound/100 kg. capacity Key pad controls High Resolution - 0.2 oz./.010 lbs./4 grams 20 hour life on one 9V battery The TIF 9020A is an electronic charging scale with a 200 pound capacity. The 9020A includes a blow molded case, keypad control with 6' cord, and is backed by a two year manufacturer's warranty. The TIF 9020A is has a resolution of 0.2 oz, and accuracy of +/- 5%.
Features: Powder coated cylinder for high gloss, durable finish Y-valve for liquid/vapor 3/4” NPT opening accepts 80% fill float switch shut-off device 1/4” opening for air purge valve Collar design for ease of handling Reusable and conforms to DOT-4BA400 specifications and ARI guidelines Pre-charged cylinder provides a clean, dry interior Storage and transport of recovered refrigerant gases Valve & Float Switch UL Listed AUS Approved and TC Canadia Approved SPECIFICATIONS Connection: 1/2" ACME Size: 9.125" x 17.52" Tare Weight: 17.99 lb Standard Specification: DOT - 4BA400 Nominal Water Capacity: >26.2 lb, 11.9 L Service Pressure: 400 PSI, 2.7 MPa Tank Test Pressure: 800 PSI, 5.5 MPa Relief Valve Pressure: 600 PSI, 4.1 MPa Air Tightness Pressure: 400 PSI, 2.7 MPa Body Material: HP295 Color: blue Mastercool 64010 30 lb DOT Approved Recovery Cylinder w/o Float Switch ME64010
The Robinair 65160 Enviro-Guard hoses for automotive R-134a meet all specifications for low permeation construction. Clearly marked for R-134a, they have 740 psi working pressure; 3700 psi burst pressure. Robinair premium refrigerant charging hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and barb, even at maximum pressure. The coupler nuts are deeply knurled for quick finger-tightening. Enviro-Guard hoses are ideal for high pressure applications, including R-410a systems. In-line ball valves control refrigerant flow, open and close in a quarter turn.