Application: Audi A3/ VW Golf IV/ Bora 1.4/ 1.6/ 1.8/ 2.0 and 1.9d (2001~2003) 1998-2005 New Beetle 1999-2005 Golf (incl. GTI) 1999-2005 Jetta (incl. GLI) 2003-2004 R32
5-piece tool set designed specifically to press-in the bushings that are located in the rear axle twist-beam of MKIV Golfs and Jettas.
This tool makes it possible to service these bushings on the vehicle without removing the rear axle and brake system, thereby saving significant time and effort.
Typically the old bushing is removed by cutting or burning out the rubber and then slitting or hammering out the bearing shell. This tool is then used to press the new bushing into place. This can be done on the vehicle and does not require removing the axle to allow access to a traditional press.
Its fine thread and thrust bearing allows the bush to be fitted quickly and easily without causing damage.
Product Information Specifications for Volkswagen VW Golf MK4/GTI/Jetta Rear Axle Bushing Bush Removal/Installer Tool F-VET151 Below:
Save time by not removing components and using a conventional press Allows quick R and R of suspension bushings Comes with 22 cups and receivers for 100's of size combinations Cup and receiver size ranges, OD 44 mm / ID 34 mm to OD 85 mm / ID 75 mm 4 ACME treaded spindles, 10 mm, 12 mm, 14 mm, and 16 mm featuring ball bearing thrust washers Manual Bushing R and R Tool allows the technician to service a wide range of bushings without removing components from the vehicle. Due to the awkward dimensions of many suspension components using a conventional press to remove and replace bushings can be time consuming and frustrating. This complete system can be used to service the vehicle anywhere in the shop.
Exceptionally stable with virtually no creep.Preâ€“stretched to minimize stretch on the bow.Manufactured from incredibly strong materials.The ultimate highâ€“performance bow string and cable.Brown and White twist.
These ball hones can be used for refinishing and resizing bores such as found in brake calipers, engine lifters, and u-joint yokes. Also useful for any bearing or bushing application. All hones are 180 grit silicone carbide for excellent cut and finish.