The AMPRO T70131 Truck Clutch Alignment is 1 1/2 inch outside diameter, and has 30 millimeters pilot. The AMPRO T70131 Truck Clutch Alignment is an effective tool for aligning and installing truck clutch pressure plates. It is made of strong and light fiberglass reinforce nylon. The 10 splines position the plates precisely as the nylon body allows for easy extraction of the tool once the plates are in position.
1 1/2 inch outside diameter with 30 millimeter pilot
Effective tool for aligning and installing truck clutch pressure plates
Strong and light fiberglass reinforced nylon
10 splines position the plates precisely as the nylon body allows for easy extraction of the tool once the plates are in position
Product Information Specifications for AMPRO T70131 Truck Clutch Alignment Below:
Qbace 5pc BMW Double VANOS Camshaft Alignment Tool Set
This kit contains all the tools necessary to assemble and time the VANOS cam-timing units on BMW M52TU . M54 and M56 6-cylinder engines utilized from 1998 onwards. Alignment Jig Adjusting plate for setting valve timing on engine with double Vanos. Sprocket Assembly Jig for pre-assembling secondary chain sprockets with chain on camshafts. Chain Tensioner Lock Pin locks chain tensioner during timing. VANOS Compressed Air Connector use to pressurize the single and double Vanos unit when servicing. Applicable to 6 cylinder engines M52TU - 1998-2000 . M54 - 2001-2004 . M56 - 2003 to present.
Manufacturer: Great Neck Saw
The OEM A/C Clutch Holding Tool holds the compressor clutch in place when removing holding bolt by adjusting pins to fit holes in clutch. This tool prevents the clutch plate from turning when moving the shaft nut. The adjustable three-stud design is meant for GM R-4 compressors, but the wrench will also fit other GM, Pitts, Warner, and Ogura clutches.
AHBMW 400 Features: -Fits over square on back of camshafts. -For setting camshaft timing. -Camshaft Alignment Tool. -Made in the U.S.A. Product Type: -Tools. Use: -Camshaft. Quantity: -Set. Dimensions: Overall Height - Top to Bottom: -2.2 Inches. Overall Width - Side to Side: -2.2 Inches. Overall Depth - Front to Back: -2.2 Inches. Overall Product Weight: -4.1 Pounds.
A misaligned clutch can cause excessive wear to your snowmobiles drive belt and clutch components. This handy tool helps you keep your clutch and belt aligned to avoid damage and expensive repairs. Easy to use and keeps your machine running in top condition. Available for Comet and Polaris offset clutches, Ski-Doo and Yamaha clutches.
OTC 1-3/4 inch OD Truck Clutch Aligning Tool is designed for use on heavy-duty single, two-plate, push/pull, manual, and self-adjust clutches. The shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines. Yet, they're rugged and will easily support the weight of heavy pressure plates. The 5030 clutch alignment shaft is 1-3/4 inch O.D., 1-1/4 inch pilot, 10 spline, and 7.375 inch long. It is similar to Ford 308-D012 (D93T-7550-C).