AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity
LED / Sound Warning when incorrect banana jacks are used relative to function switch setting
Auto and Manual Ranging with Relative measurement (all ranges except frequency)
All range fused (resettable) with 1 Year Warranty
Auto power off (could be disabled) & Blue LED Back-lit LCD display
Powered by RioRand Advanced Technology
Product Information Specifications for Mastech MS8268 Digital AC/DC Auto/Manual Range Digital Multimeter Meter Below:
TwistGuard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.
The Triplett 2030-C is a 3-3/4 digit (4000 count) pocket sized digital multimeter with a built-in hard case. It offers a variety of measurement features including AC/DC Voltage, AC/DC Current, Resistance, Continuity, Diode Test, Frequency, and Capacitance. The ABS plastic housing provides impact and drop resistance in an ergonomic design, and the user-friendly Auto Power Off feature helps maximizes battery life. With an industry standard CAT II design that provides resistance to damage from transient overvoltages in any settings. The Model 2030-C is suited for a variety of commercial and residential applications such as security, home theater, electrical, HVAC installations and more. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.
The Uni-Trend UT107 is an automotive tester and digital multimeter flawlessly combined into one, it can measure AC/DC voltage, DC current, resistance, temperature in Celsius, as well as diode check and continuity test. For automotive testing, you can use it to measure dwell angle and RPM up to 10,000. One of its unique function is the 12V battery tester with a built-in load.
DC Voltage: 200 mV, 2V, 20V Â±0.5% 1000V Â± 0.8%, Impedance: 10 M ohm
AC Voltage: 200V/750V at 40 to 400Hz Â±1.5%, Impedance: 10 M ohm
DC Current: 200mA Â± 0.8% / 10A Â± 1.2%
Resistance: 200 ohm, 2K ohm, 20K ohm, 200K ohm Â± 0.8% 20M ohm Â±1.5%
Temperature: -40 to 1000 degrees C
12V battery test (with built-in load): Â±3.0%
Tachometer: 500 to 10,000 RPM Â±3.0% (4, 6, and 8 Cylinder)
Dwell: 4, 6, and 8 Cylinder Â±3.0%
Dimensions: 179 x 88 x 39 mm
Weight: 380 grams
Manual Range Control
Automatic Negative Polarity Indication
Test leads position indication
Low Battery Indicator
Over Range "1" Display
What's in the box:
UT107 Automotive tester
9V battery (installed)
Extech EX205T True RMS Auto Ranging Digital Multimeter
Manufacturer: FLIR Systems
Autoranging meters provide more accurate readings when measuring distorted waveforms 2000 count large backlit dual LCD with easy-to-read digits. Low current capability with resolution to 0.1 A. Max hold. Input fuse protection. Auto power off and data hold
Manufacturer: FLIR Systems, Inc.
The TA55 is an AC Current Line Splitter. Add to your test tools with FLIR Test Accessories that extend the functionality and versatility of your instruments.Â These accessories are certified to the latest standards and to the highest applicable rating level and come with a 2 year warranty.
The Triplett 1101-B is a 3-1/2 digit (1999 count) compact digital multimeter with a backlit LCD display. It offers a large variety of measurement features including AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test, and Temperature. The rubberized boot provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Power Off feature helps maximizes battery life. With an industry standard CAT II design it provides resistance to damage from transient overvoltages in any demanding settings. The 1101-B is well suited for a variety of commercial and residential applications such as security, home theater, electrical, HVAC installations and more. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.
Custom Accessories 10709W E-Tek Digital Multi-Meter
Manufacturer: Custom Accessories, Inc.
Brand: Custom Accessories
The professional digital multimeter by Custom Accessories can be used in many home and auto testing applications. The multimeter measures AC/DC voltage up to 600 volts. The tester comes with its own carrying case and stand and it is enclosed in a durable rubber molded casing. A work light has been built in for dimly lit applications.