Operating voltage: 12V Maximum operating current: 10A Flow: 35L / min Cord Length: 285cm Continuous working time: 10min Air Hose: About 1M Weight: about 1.5kg
1. Ultra-small vibration and noise (strong)
2. Shockproof rubber pads strong and robust
3. Range is (0--100) PSI pressure gauge (higher accuracy)
4. Pump speed, for 5-7 minutes a complete tire can be filled without gas
5. Comes with three kinds of gas nozzle, bicycles, motorcycles, balls, inflatable can also be encouragement.
6. Barometer: 100PSI
1, The first launch with the car engine, to enhance the power, not the car battery power consumption
2, The machine limit DC (DC12V10A) power supply, can not use household high voltage power supply.
3, For prolonging motor life，please allow it to cool in 10-minute continuous working. Inflatable rubber boats, it can work for 30 minutes.
4, General tires inflated, about 3-6 minutes can reach 220KPA normal tire pressure. Large tires is a little longer. As starting inflated, the meter pointer rapid increase represents both the air and did not charge into the tire, must be stopped again, otherwise, the instrument and the motor will be damaged.
Note:The tire inflator does not apply to trucks and lorry.
Car Charge Only. 12 VOLT - 100 PSI Maximum Working Pressure, engine must be running during use. Please look at the listing's detail.
Air Hose: About 1M. Maximum operating current: 10A. Flow: 35L / min. Barometer: 100PSI. Note: The tire inflator does not apply to trucks and lorry.
Comes with three kinds of gas nozzle, bicycles, motorcycles, balls, inflatable can also be encouragement. Cord Length: 285cm. Continuous working time: 15min.
Weight: about 1.5kg. Pump speed, for 5-7 min a complete tire can be filled without gas; Please allow it to cool in continuous 10-minute work to prolong motor life. Inflatable rubber boats, it can work for 30 min.
Ultra-small vibration and noise (strong). Please check about the tire pressure when using tire inflator.
This is a Hand Pump for Charging Pneumatic Retract Systems with Air. FEATURES: Has a High Stroke-To-Bore Ratio so High Pressures with Minimum EffortRated at Over 100 psi Gauge on the Pump w/Ball Check Valve so Tank Pressure can be Read Bright Nickel Finish YOU WILL RECEIVE: One 100 psi Hand Pump w/Gauge and 14" Red Tubing COMMENTS: Robart makes the 164C Air Pump Mounting Clips (ROBQ2362) for conveniently mounting the hand pump to the outside of a field box.
Coil Hose with Inline Inflator/Deflator, includes a, 3-piece inflation tip kit, quick connect stud and a storage bag. Rated to 200 PSI. Continuous deflation-push down and turn/lock the deflator collar. Intermittent Deflation- Push the deflator collar down to deflate, release to stop deflation. Pressure Gauge-Monitor tire pressure. 25 Extension Coil Hose-Take the hose to your work area easily. Heavy duty storage-zippered storage bag included. 120 PSI gauge.