The PORTER-CABLE PCE210 1/2-inch Impact Wrench with Hog Ring Anvil features a 7.5 amp motor that delivers power for all kinds of jobsite applications. It offers 240 ft-lbs of deliverable torque for heavy duty applications, along with 2,700 IPM and 2,200 RPM which provide fast application speed for increased productivity. This impact wrench has a cast metal gear housing designed to dissipate heat providing durability and longer life. A soft grip handle provides increased comfort during use, decreasing user fatigue.
7.5 amp motor with 240ft-lbs of torque for heavy duty applications
2,700 IPM and 2,200 RPM for fast application speed
Cast metal gear housing dissapates heat
Product Information Specifications for PORTER-CABLE PCE210 Impact Wrench with Hog Ring Anvil, 1/2-Inch Below:
This 8.5 amp electric impact wrench is not only powerful with 260 ft-lbs max torque, but it also provides you with the convenience of electric power, eliminating the need for an air compressor. The comfortable grip combined with a dual bearing armature system leads to less fatigue over time. The 1/2" Hog Ring Anvil is built stronger than detent pin types, keeping sockets in place firmly while the rocker switch quickly and easily switches between forward and reverse directions.
Craftsman C3 1/2" Cordless 19.2 Volt Impact Wrench Driver Kit
Craftsman C3 Cordless 1/2'' Impact Wrench Kit comes with a 19.2-Volt variable speed motor for the power you need when you need it to fasten and unfasten.
Cordless 1/2" Impact Wrench Kit: Torque Power to Go
Whether you find yourself pulled over on the side of the road with a flat tire or putting together a new deck on the back of your house, the Craftsman C3 Cordless 1/2'' Impact Wrench Kit delivers the power and portability you need to get the job done. And the ergonomically designed handle provides a firm, steady, comfortable grip no matter the conditions. It may be wet and cold or hot and humid outside, or your hands could be covered with oil or engine grease, you'll never lose your grip. That's especially important when time counts.
The Cordless 1/2" Impact Wrench Kit comes fully powered by a 19.2 volt NiCad battery-more than enough power to loosen the toughest bolt or most stubborn lug. Plus, a built-in LED acts as a flashlight so you can see what you're doing even at night. Add it to your arsenal of other Craftsman power tools, including one to keep in your trunk so you'll always be prepared for anything.
Chicago Pneumatic Tool CP7782-6 Heavy Duty 1-Inch Impact Wrench with 6-Inch Extended Anvil
Manufacturer: Chicago Pneumatic Tool Company
Brand: Chicago Pneumatic
The Chicago Pneumatic CP7782-6 1" Heavy Duty Impact Wrench with 6" Extended Anvil has great power for the toughest jobs on truck, bus and heavy equipment applications. Regulator with integrated forward/reverse with 3 position power settings in both directions. Ergonomic side handle and socket retainer ring combined with hole retainer.
Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.Low profile, heat-treated sockets center the pneumatic driver on the frozen bolt. The hex shaped socket floats on the driver allowing a turning wrench to be used while impacting the bolt head. Six socket sizes fit up to .830" hex. Focuses the pneumatic hammering action on the center of the fasterner.Lisle Corp 60260 Seized Fastener Remover Set
The 18-Volt Ryobi ONE+ Cordless 1/2 in. Impact Wrench is great for a variety of projects from automotive and mechanics to building a deck and other heavy duty applications. The powerful 18-Volt motor allows for 0-3000 RPM for tightening or loosening of various nuts and bolts. The wrench has a 1/2 in. anvil with pin retention for easy and secure socket connection. >> Impact mechanism produces 200 ft. lbs. of torque and 0-3000 impacts per minute >> Powerful motor with 0-3000 RPM (no load speed) >> Bright LED light illuminates as the trigger is pulled for ample light when working in dimly lit conditions >> Overmold grip for added comfort >> Charger sold separately; compatible with all Ryobi 18-Volt ONE+ dual chemistry chargers >> Battery sold separately; compatible with these batteries: P100, P101, P102, P103, P104, P105, P107, P108
Ingersoll Rand With 2" extended anvil, this tool is ideal for tire changing. Enhanced twin hammer mechanism. Handle exhaust. Variable power control in forward. Increased durability, quieter operation. Up to 450 ft./lbs. of torque.
Milwaukee 2795-22CT M18 Fuel 3/8 Inch Impact Wrench Combo Kit
Manufacturer: Milwaukee Electric Tools
Brand: Milwaukee Electric Tools
2654-20 offers industry-leading power in Mode 3 - to 200 ft-lbs. of Fastening Torque and up to 2,400 RPM 2654-20 offers greater control in Mode 2 - to 80 ft-lbs. of Fastening Torque and up to 1,600 RPM 2654-20 offers ultimate control in Mode 1 - to 30 ft-lbs. of Fastening Torque and up to 900 RPM 2735-20 delivers 160 Lumens M18TM REDLITHIUMTM 2.0 Battery Packs provide up to 2X more run-time, 20% more power and 2X more recharges than a standard Lithium-Ion battery. This combo kit is designed with the automotive technician in mind, and includes the 2654-20, the industry's strongest 3/8" impact wrench, and the 2735-20 M18 LED Worklight. Powered by FUELTM technology and featuring a POWERSTATETM Brushless motor, REDLINK PLUSTM Intelligence, and M18TM REDLITHIUMTM 2.0 Battery Packs. The 2654-40 delivers a best-in-class 200 ft-lbs. of fastening torque and features Milwaukee's proprietary 3-Mode Drive-Control, allowing users to dial down the tool's maximum output torque to prevent over-torquing fasteners. The 2735-20 M18TM LED illuminates work areas with a 160 Lumen LED and features a 135 rotating head. This Kit includes (2) M18TM REDLITHIUMTM 2.0 High Capacity battery packs, an M12TM & M18TM Multi-Voltage Charger, and a Contractor Bag.
AIRCAT 1000-THBB Sleek Black Boot for 1150, 1000-TH, 1100-K
Wow! This incredible protective cover for your AIRCAT 1150 & 1000-TH is absolutely awesome. Some people think of protection, but this is true unconditional protection. It keeps giving 24/7 even when you donâ€™t, Protect your AIRCAT today! By the way, the protective cover is made of Proprietary Durable and incredible Vinyl material known around! Plus its made in the U.S.A.