The SRL8 Heated Diode Refrigerant Leak Detector is designed exclusively to make the HVAC/R Technician's job easier, faster, safer and more efficient. We set out to develop the best heated diode leak detector for HVAC/R. We believe the SRL8 is it. It comes in kit form in a rugged, blow-mold case with all of the extras you don't get from the other guys.
Triggers on all CFCs, HFCs, HCFCs and blends. More sensitive to some refrigerants than others.
15-hour rechargeable, user replaceable battery. It lasts almost two full workdays on a single charge (if your hunting down leaks all day). You can also use it while it's hooked up to the wall or vehicle charger.
Filter system helps protect the sensor from moisture and other contaminants. The sensor is connected to the body at the other end of the snout. The filter is at the tip of the snout. If you accidentally hit some condensation or oil, the filter swells, shutting off the pull to the sensor and protecting it from failure.
Manual or automatic zeroing. It auto zeros every two seconds until a leak triggers the sensor. After that you can manually zero the detector to help further pinpoint leaks.
Up and running in 30 seconds. Some heated elements and corona discharge units take much more time to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.
Product Information Specifications for Fieldpiece Heated Diode Refrigerant Leak Detector - SRL8 Below:
Signstek Portable AC Refrigerant Halogen Gas Leakage Detector Tester with High Sensitivity for Home Use
The Signstek HLD-100+ gas leakage detector is used to detect halogen gas leakage,designed with high sensitivity and stable function, is the most reliable negative corona halogen leak detector at present. Functions: A: Detect leaks in air-conditioning, freezing systems and responds to ALL halogenated (containing chlorine or fluorine) refrigerants, including: *CFCs: R12, R11, R500, R503etc. *HCFCs: R22, R123, R124, R502etc. *HFCs: R410a,R134a, R404a, R125 etc. B:Detect Ethylene Oxide gas leaks in hospital sterilizing equipment. C:Detect SF-6 in high voltage circuit breakers. D:Detect most gases that contain Chlorine, Fluorine, and Bromine (halogen gases). E: Detect cleaning agents used in dry cleaning applications. F. Detect halogen gases in fire-extinguishing system. Specifications: Maximum sensitivity: 0.1 oz/yr (3g/yr) for all halogen refrigerants Working Mode: Continuous and no limit Reaction time: Instant Resetting time: 2 seconds Warm-up time: About 6 seconds Sensor tip life under continuous operation: More than 50 hours in normal detecting status Power Supply: 3V DV, Two-cell C Alkaline batteries Probe length: 14" Dimension: 9 1/2" x 2 1/2" x 2 1/2" Weight: 0.6kg Important Note: Reset function: before using this product every time,please be sure that press Reset Button for 1 second in fresh air, the direct light will become orange for 2 second, means that you complete the reset function,then you can continue to use it. Signstek is a registered tra...
Excellent method for adding refrigerant oil or large amounts of UV leak detection dye to the A/C system. Add oil by allowing vacuum to pull it in after the evacuation process, or use refrigerant to push it in using the recharge system. Rugged all metal 2 oz. canister. The standard models use a needle style valve attached between the manifold gauge set or charging equipment and A/C hose. 13mm-M x 13mm-F Low-Side Coupler (R134a).
AGPtekÂ® Portable AC Refrigerant Gas Leakage Detector Leak Tester with high sensitivity 3g/yr (0.1oz/yr)
Applications: 1. Detect leaks in air-conditionings, freezing systems and responds to ALL halogenated (containing chlorine or fluorine) refrigerants, including: CFCs: R12, R11, R500, R503etc. HCFCs: R22, R123, R124, R502etc. HFCs: R410a,R134a, R404a, R125 etc. 2. Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas). 3. Detect SF-6 in high voltage circuit breakers. 4. Detect most gases that contain Chlorine, Fluorine, and Bromine (halogen gases). 5. Detect cleaning agents used in dry cleaning applications such as perchloroethylene. 6. Detect halogen gases in fire-extinguishing system. Specification: Maximum sensitivity: 0.1 oz/yr ( 3g/yr ) for all halogen refrigerants Working Mode: Continuous and no limit Working temperature: 0?~52? Reaction time: Instant Resetting time: 2 seconds Warm-up time: About 3 seconds Sensor tip life under continuous operation: More than 50 hours in normal detecting status Power Supply: 3V DV, Two-cell C Alkaline batteries (Not include) Probe length: 14" Overall Dimension: 9 1/2" x 2 1/2" x 2 1/2" IMAGEÂ® - is a registered trademark protected by the US Trademark Law. IMAGEÂ® products are sold by authorized sellers BrainyTrade only.
SUPER SEAL PREMIUM â€“ Americaâ€™s Original & Most Trusted Stop Leak. Permanently seals & prevents leaks â€“ saves time & money. SUPER SEAL has a host of benefits to AC systems: Seals leaks in hard parts: evaporators, condensers, accumulators, and metal lines. Seals leaks in soft parts: O-rings and rubber hoses. Increases system efficiency: lowers vent temperatures. Save time and money: avoids costly repairs or replacements. Use what the PROFESSIONALS use. Use SUPER SEAL. MADE IN AMERICA. Millions of systems repaired.