Brass manifold with easy-to-grip handles and R12/R134a gauges display pounds per square inch and Fahrenheit temperatures. Complete with 72 inch R134a hose set (1/2 inch ACME x 14 millimeter) and 72 inch R12 hose set (1/2 inch ACME x 1/4 inch MFL), rear R134a and 1/2 inch ACME fittings for holding hoses, 90 Degree manual couplers, 1/2 inch ACME bottom ports, and blow molded carrying case.
Brass manifold with easy-to-grip handles
R12/R134a gauges displays pounds per square inch and fahrenheit temperatures
Rear R134a and 1/2 ACME fittings for holding hoses
72 inch R134a Hose Set (1/2 inch ACME x 14mm)
72 inch R12 hose set (1/2 inch ACME x 1/4 inch MFL)
Product Information Specifications for Robinair 44150 Dual R12 and R134a Brass Manifold Set with 72" Hoses Below:
The Workingman's Choice(TM) series R-134a 2 valve anodized aluminum block body with 1/2 " ACME fittings, Triple-Seal(TM) piston valves, sure grip rubber over metal valve handles, easy-to-read 3 1/8 " (80mm) Class 1.0 accuracy gauges, protective gauge boots, premium 6ft Pro-Set(R) hose set, HI & LO manual R-134a couplers and hanging hook. MADE IN USA. Aluminum block manifold with triple o-ring seal piston valves 3-1/8" (80mm) 1% accuracy gauges with rubber boots Large gorilla grip rubber covered knobs for easy grip 6 foot colored hoses with manual couplers Custom padded carrying case used to store the manifold with the hoses connected to the manifold Specifications:Body Type: 2 valve anodized aluminum body with 1/2 " ACME fittingsValve Type: Triple Seal(TM) piston valvesGauge Type: 3 1/2 " (80mm) Class 1.0 with internal silicon dampening cup for Flutter-Free operationRefrigerant Scales: R-134a OnlyPressure Scales: PSI / kgcm2Temperature Scales: ° / °Hoses: 3 premium 6ft (180cm) Pro-Set(R) hoses: 1/2 "ACME x 14mm red and blue; 1/2 "ACME x 1/2 "ACME yellowCPS MT7I7A6Q Working Man's Manifold
Interdynamics ACPRO R-134a Air Conditioning Manifold Gauge Set with Hoses and Quick Connects comes with sight glass and a full set of hoses that include 48 inch red and blue hoses and a 72 inch yellow charging hose. The easy to read gauges accurately measures pressure and monitors condition of refrigerant. This all metal fittings kit also contains low and high side quick connect valves with shut off knob for trouble free hook up. Meets EPA requirements and will service all R-134a systems.
Forged aluminum alloy body makes this unit lightweight for handling ease with the durability and reliability required for repeated use. Fourth hose to enable connection to hi-/loses, refrigerant tank and recovery unit or vacuum pump for diagnostics, evacuation and charging without switching hoses.3/8 inch Vacuum port for use with larger hose to cut evacuation time by up to 33%.
The hilmor 4-valve Aluminum Manifold is built to last with a forged aluminum body. It's designed to be leak-resistant with replaceable stainless steel valve seats, SAE-style O-rings and a securely seated large sight glass. A true 3/8" bore throughout the valve gives you faster vacuum pulls. Front-mounted hose positions and a permanent location for temperature clamps result in added convenience. Plus, comfort grip handles are optimally sized for easier turns.
3 in 1 1/4" inlet air manifold with three 1/4" FNPT outlets can supply up to 3 air tools from a single inlet. No need to disconnect and reconnect for every tool change. Can be attached to the end of the hose or mounted to a wall or bench.
4-Valve test and charging manifold provides the flow that's proven faster than any conventional manifold. The aluminum alloy body is forged for strength and reliability with 3/8" bores through the body to speed the job. Heavy duty hook wonâ€™t pull out. Also available with 3-1/2" (90 mm) red and blue liquid-filled gauges. Fourth hose enables connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump for diagnostics, evacuation and charging without switching hoses. Available in 1/4" hi-/lo-sides with 3/8" vacuum port for regular jobs, or 3/8" hi-/lo-sides with 1/2" vacuum port for larger systems.