Rx11-flush has been the industry's standard for over a decade and contractors agree, it's the best flush for R-410A retrofits and after compressor burnouts. Benefits: Low Boiling point enhances complete evacuation of flush. No oily residue left behind. Safe, nontoxic, and nonflammable. Formulated with patented solvent technology. Approved as part of the U.S. EPA's Significant New Alternatives Policy (SNAP) Program. Over a decade of proven success. Convenient pressurized package sizes. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. Rx11-flush, pioneered by the same chemists who produced the original R-11. Rx11-flush offers all of the benefits of R-11 without the environmental concerns.It dries quickly, has a low boiling point (106F) and will not attack components. Additionally, with the advent of 13 SEER equipment and the retrofit to R-410A equipment, Rx11-flush is the ideal solution for flushing line sets.
Rx11-flush is a unique solvent engineered specifically for flushing refrigeration and air conditioning systems.
Based on patented HFC solvents developed by DuPont, Rx11-flush is ozone-safe, non-toxic, and non-flammable.
Used exactly like the old R-11 flushing process, its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residues, oils, acids, water and other particulate.
It enhances system's service life and avoids the need for time-consuming repeat visits.
Rx11-flush is ideal for system flushing after burnouts, during retrofits and for flushing line sets for R-410A conversions.
Product Information Specifications for Nu-Calgon 4300-11 - Rx11 Line Set Flush 2 lb. Canister Below:
TIF 9020A Slimline Refrigerant Scale, 200 Pound Capacity Â TIF 9020A Slimline Refrigerant Scale Ã— TIF 9020A 200 pound/100 kg. capacity Key pad controls High Resolution - 0.2 oz./.010 lbs./4 grams 20 hour life on one 9V battery The TIF 9020A is an electronic charging scale with a 200 pound capacity. The 9020A includes a blow molded case, keypad control with 6' cord, and is backed by a two year manufacturer's warranty. The TIF 9020A is has a resolution of 0.2 oz, and accuracy of +/- 5%.
Features: Powder coated cylinder for high gloss, durable finish Y-valve for liquid/vapor 3/4” NPT opening accepts 80% fill float switch shut-off device 1/4” opening for air purge valve Collar design for ease of handling Reusable and conforms to DOT-4BA400 specifications and ARI guidelines Pre-charged cylinder provides a clean, dry interior Storage and transport of recovered refrigerant gases Valve & Float Switch UL Listed AUS Approved and TC Canadia Approved SPECIFICATIONS Connection: 1/2" ACME Size: 9.125" x 17.52" Tare Weight: 17.99 lb Standard Specification: DOT - 4BA400 Nominal Water Capacity: >26.2 lb, 11.9 L Service Pressure: 400 PSI, 2.7 MPa Tank Test Pressure: 800 PSI, 5.5 MPa Relief Valve Pressure: 600 PSI, 4.1 MPa Air Tightness Pressure: 400 PSI, 2.7 MPa Body Material: HP295 Color: blue Mastercool 64010 30 lb DOT Approved Recovery Cylinder w/o Float Switch ME64010
The Robinair 65160 Enviro-Guard hoses for automotive R-134a meet all specifications for low permeation construction. Clearly marked for R-134a, they have 740 psi working pressure; 3700 psi burst pressure. Robinair premium refrigerant charging hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and barb, even at maximum pressure. The coupler nuts are deeply knurled for quick finger-tightening. Enviro-Guard hoses are ideal for high pressure applications, including R-410a systems. In-line ball valves control refrigerant flow, open and close in a quarter turn.
Wrap the heater around the cylinder. Using the extra long Velcro straps, secure the heater to the cylinder with the printed side out. It is important that the heater fits tightly. Check to make sure that the area behind the thermostat which is molded near the edge of the heater is making good contact with the surface of the cylinder. The heater should be positioned near the bottom of the cylinder to be most efficient.
Robinair (AC1234-6) 1234YF Standard and Hybrid A/C Service Machine
The AC1234-6 is the only product available today that fully meets SAE's requirement for recovering, recycling and recharging vehicle A/C systems that use the new R1234YF refrigerant. This is a fully automatic ACS machine that comes with an integrated refrigerant identifier that samples the refrigerant in the vehicle's A/C system prior to recovery, is a highly accurate and reliable machine, and can service both standard and hybrid vehicle A/C systems. Features: Services both standard and hybrid vehicle A/C systems. Fully automatic operation; program for service, walk away and return when complete. 95% recovery efficiency and programmable vacuum operation helps get to the necessary vacuum level in any condition quickly. System leak test to identify gross leaks in a system and charge accuracy within +/- Â½ oz. Automatic oil drain shows how much oil was removed from the system during service and an automatic air purge removes the potential of air accumulating in the internal tank. Integrated refrigerant identifier (meets SAE J2927) and liquid refrigerant flushing function can flush A/C systems or individual components using liquid refrigerant instead of harsh chemicals. Automatic internal tank refill; no stopping to fill the internal tank during service, or before service. 1/4 Color VGA display, large easy to read graphical display. On-board printer capable of printing vehicle service report slips to present to customers. Specifications: Operating voltage - 103-127V, 60Hz AC. 1...
1/4" Flare Male x 1/4" Male Refrigerant Recovery Filter Drier - HVAC - Air Conditioning Refrigeration
Prefilter For Refrigerant Recovery - 1/4" Flare Male x Male - Protects Against Solid Contaminants - 5 Cu In - Enhances Reusability Of Recovered Refrigerant - Fits Most Refrigerant Recovery Machines - Mfg #PF052