Mastercool (53010) Silver Pressure Test Regulator Kit
Mastercoolâ€™s nitrogen regulator is specifically designed to meet the specifications of HVAC/R and automotive A/C systems. This single stage nitrogen regulator is used to test systems for leaks when they do not contain refrigerant. â€¢ 1/4â€ SAE flare outlet port, with control valve, to keep pressure on the regulator at all times â€¢ T-Handle for ease of pressure adjustment â€¢ 63 mm (2 1/2â€) gauges with guards â€¢ High pressure gauge 4400 psig (300 bar) â€¢ Low pressure gauge 1000 psig (70 bar) Pressure Testing Regulator Kit includes: Nitrogen Pressure Regulator (Standard CGA580) (US), 48â€ Yellow Charging Hose, Leak Testing Adapter, Blow molded case
Blended leak detection dye for all coolants including Extended Life Coolants. Works with any fluorescent leak detection inspection lamp. Will not discolor the coolant, which can lead to misdiagnosis of engine problems.
Ultra-sensitive sensor detects less than 15 ppm methane and better than 12 ppm for propane. Performs equally well on a complete list of detectable gases including acetylene, butane, and isobutane Automatic calibration and zeroing Sensor replacable after full service life SmartAlarm LED shows how big or small a leak is on a scale of 1 to 9 24-month limited warranty (12-month warranty on sensor) Made in the USA Yellow Jacket 69373 Combustible gas detector w/case. Unit is preset at normal sensitivity, but can be switched to high or low. Slow beeping indicates that unit is warmed up. Frequency increases when a leak is detected until an alarm sounds when moving into high gas concentration. If no leak is detected in a suspected area, selecting high sensitivity will detect even low levels in the area. Move the tip over more defined areas, and you will be alerted when the tip encounters the concentration at the leak source. With ultra-sensitive, long life sensor. Detects all hydrocarbon and other combustible gases including propane, methane, butane, industrial solvents and more.
The Robinair 16910 CoolTech ID Plus identifies refrigerant type and purges damaging air. In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges them directly from the tank or system. It displays the actual percentage of R-12, R-134a, R-22, and air in the system or tank and gives you the option of purging air if significant concentration is found. A hydrocarbon alarm sounds if flammable substances are sensed. An on-board printer port allows you to connect a printer for a hard copy of testing results.
The REED Combustible Gas Detector has a heated semiconductor gas sensor and can sense gasoline, propane, natural gas or fuel oil. It features a high-low sensitivity selector and detects leaks as small as 5ppm of gasoline. It has an ambient concentration reset function and audible and visual leak indicator and a flexible stainless steel probe.
â€¢Sensitivity: Less than 5 ppm â€¢Sensor life: Over 300 hours â€¢Response Time: Instantaneous â€¢Probe length: 17" Weight: 1.5 lbs. â€¢Warm up time: 20 seconds or less â€¢Power: 4 AA alkaline batteries, â€¢8 hours continuous life Made in the USA.
ACDelco 10-5046 Dex-Cool Leak Detection Tracer Dye - 1 oz
Brand: General Motors
ACDelco Coolant System Tracer Dye is a fluorescent leak detection dye that is specifically formulated to pinpoint leak sources in cooling systems that use DEX-COOL (orange) coolants. The use of ACDelco Coolant System Tracer Dye will not change the original appearance of the long life coolants. This tracer dye is used in conjunction with ACDelco Ultra Violet (UV) Leak Detection Lamp Kit (PN 12377979).