The HGH2-FZ uses a truck's on-board air supply to inflate tires in remote situations. This truck tire inflator kit features the Flexzilla air hose. Flexzilla is a revolutionary hose featuring a Premium Hybrid Polymer material that redefines flexibility. Flexzilla hose characteristics offer zero memory allowing it to lay-flat exactly where you drop it and won't work against you during operation or coiling after use. Flexzilla offers extreme all-weather flexibility, even in sub-zero conditions. Flexzilla is currently in use by oil companies located in Alaska! Flexzilla Air Hoses offer superior flexibility for tight radius bends in both cold and warm environments. Engineered polymer-blend material permits use in environments where general purpose PVC and rubber hoses may become too stiff.
3/8 in. ID x 50 ft. Flexzilla Air Hose
30 Degree Dual air chuck
Extreme all-weather flexibility, even in sub-zero temperatures! (-40 Degree to 150 Degree F)
Maximum working pressure: 300 PSI
Product Information Specifications for Flexzilla Truck Tire Inflator Kit with 3/8 in. x 50 ft. Hose, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HGH2-FZ Below:
The Flexzilla AL2000FZ Inflator Gauge features a straight on chuck, 12 inch Flexzilla fill hose, brass internals, and a heavy-duty gauge calibrated in 2 PSI increments from 20-100 PSI (Full Range: 20-170 PSI).
Viair Quarter Duty Onboard Air System is a smaller, 120 PSI onboard air system suitable for many pneumatic needs, including smaller inflation tasks. Provides enough service time to operate for about 10 minutes of continued use, and 30 minutes of cool down time. Features permanent magnetic motor and 25 percent of duty cycle and 100 PSI of pressure.
Dual Performance Value Packs (400C),includes two heavy duty 40-amp relays and a 110 PSI cut-on, 145 PSI cut-off pressure switch, to make installing a heavy duty onboard air system simple, and affordable. All Dual Packs come with remote mount filter assemblies and mounting hardware.Each dual performance Value Pack is rated to fill tank volumes up to 10 gallons.
Forney 75337 Air Blow Gun, Lever-Type with 4-Foot Extension and Rubber Tip, 1/4-Inch Female Inlet
The Forney 75337 lever-type blow gun with 4 foot extension and rubber tip is zinc alloy with blue zinc coating. Extension is aluminum with oxidized finish. For use on regulated compressed air lines. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Lever-type blow gun with 4-foot (101.6mm) extension and rubber tip. Recommended working pressure of 90 PSI. Max working pressure is 150 PSI. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
Green Convenience Mini Portable DC12V Multi-Use Heavy-Duty Air Compressor Tire Inflator
Manufacturer: Green Convenience
Brand: Green Convenience
Model: Ya Store
Car charge only, do not include wall plug. Operating voltage: 12V Maximum operating current: 10A Flow: 35L / min Cord Length: 285cm Continuous working time: 10min Air Hose: About 1M Weight: about 1.5kg 1. Ultra-small vibration and noise (strong) 2. Shockproof rubber pads strong and robust 3. Range is (0--100) PSI pressure gauge (higher accuracy) 4. Pump speed, for 5-7 minutes a complete tire can be filled without gas 5. Comes with three kinds of gas nozzle, bicycles, motorcycles, balls, inflatable can also be encouragement. 6. Barometer: 100PSI Note 1, The first launch with the car engine, to enhance the power, not the car battery power consumption 2, The machine limit DC (DC12V10A) power supply, can not use household high voltage power supply. 3, For prolonging motor lifeï¼Œplease allow it to cool in 10-minute continuous working. Inflatable rubber boats, it can work for 30 minutes. 4, General tires inflated, about 3-6 minutes can reach 220KPA normal tire pressure. Large tires is a little longer. As starting inflated, the meter pointer rapid increase represents both the air and did not charge into the tire, must be stopped again, otherwise, the instrument and the motor will be damaged. Note:The tire inflator does not apply to trucks and lorry.
EXPEDITION model CyclePump tire inflator with straight air chuck. If you want quality, performance, and reliability then you've come to the right place. It has a LIFETIME Warranty. The CyclePump uses a powerful 12-volt, 10-amp motor and a high quality metal compressor specially designed for motorcycle applications. The CyclePump is proudly made in the USA by American workers. We don't use fragile plastic components that break if you drop it on the ground; instead we house the components inside an aircraft-grade aluminum case. The locking air chuck is solid brass. We armored the switch and beefed-up the components is's is virtually indestructible. It's ready for a 'round-the-world expedition, which is why we offer a Lifetime Warranty. Connect the CyclePump to any 12 volt power source. We give you 4 powering options: 1.) battery alligator clips, 2.) cigarette lighter plug, 3.) Euro DIN (BMW) style plug, and 4.) a flat SAE connector that'll plug into most battery charger pigtails. Attach the air hose to the tire using the locking brass air chuck, flip the switch, and begin filling your tire. Tire inflation time varies by size, air density, voltage, laden tire load, and other factors, but as a general rule the CyclePump will fill a front motorcycle tire in 2-3 minutes and a rear tire in 3-5 minutes. Topping off a low tire? Those last few pounds will take less than a minute. Whatever brand you ride, the CyclePump will fill your tires quickly because it's rated to pressures ove...
This car Wet/Dry handheld vacuum cleaner with multi-functions is very easy to operate. You will find very useful for its all in one design. It has 100W strong Suction power with 5 meters long cable and various suction accessories for you to clean every corner of your car easily. 100W air compressor with pressure gauge and LEDs are also built-in the vacuum. Instead of being caught helpless roadside with a dastardly flat, be one step ahead with this highly portable and easy to use this air compressor kit in your trunk. Specifications:Dimensions: 13.5" x 3.5 " x 4.5 " (L x W x H, Approx.) Weight: 1150g Power Source: (DC12V) Vehicle's cigarette lighter outletCable Length: 5 meters (Approx)Input power: DV-12V Suction power: 100W Inflatable Power: 100W (gauge measures to 150 PSI)Package included: 1 x all in one Vacuum Cleaner 1 x Set of Accessories
Roypow I50 12V Digital Tire Inflator Car Air Compressor 150PSI, 3 Minutes High Speed, Removable Tire Gauge & Tire Pressure Preset & SOS Flashlight
RoyPow I50 Advantages Powerful & Multi-function By the heavy-duty of 120W operating power, this portable Roypow Air Compressor/ Inflator generates a powerful flow to maximum inflate up to 150 PSI air pressure; For this reason, it only takes approx. 2 minutes to inflate a smaller 175/70R13 Tire from 0 to 30.5PSI. Besides inflating the tires, this gadget is also suitable to inflate various sports balls, camping equipment, toys and so on. Compact & Portable Compare with traditional bulky air compressor, this gadget is quite compact and portable to be packed in a handy carrying pouch, easy to be stored in the car boot, garage or shed as required, and taking up very little space. Exclusive Design The unique design of removable tire gauge makes it more convenient, and easier to be used in regular TPMS. The concealed back slot allows the Air Hose and power cable to be embedded for simple storage. Global Famous Warranty At Roypow, we believe in our products. Therefore, we back them all with an 18-month warranty and provide friendly, easy-to-reach free Lifetime Technical Support also.
Tire DeflatorEZ Tire DeflatorEZ Tire Deflator; 0 - 60 PSI;FEATURES:Rapidly Deflates TiresHolds Valve Core In Unit While DeflatingAbility To Check Pressure While DeflatingFrank Currie began designing and building differentials for material-handling equipment back in 1959. He worked out of his garage fabricating and assembling rearends for personnel carriers, electric carts, tugs, scissor lifts and other specialty vehicles. Today Currie Enterprises occupies a 27,000-square-foot complex in East Anaheim, California. The company has grown in size and the product line has continued to expand. Currie Enterprises now has nearly 50 employees and boasts a state-of-the-art manufacturing facility. The Curries design, build, modify, test, sell, and install rearend and drive-train products, all under one roof. From humble beginnings as a dream of Frank and Evelyn, Currie Enterprises has become the most recognized name in specialty rearends and components. Currie Enterprises is preparing for the future by redesigning and manufacturing the components needed to continue offering complete rearends that exceed the original cores in strength, quality, durability and versatility. Currie Enterprises has long been known for making the best rearends and components money can buy. We spare no expense in creating rearends for a multitude of applications. We stand behind each and every rearend that leaves our facility. So no matter what the application, bring us your problem and Currie Enterprises will ...