The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators
Large easy adjusting knob to increase or decrease delivery pressure
Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
Outlet features shut-off with back flow check valve and 5/16" I.D. hose barb nipple
Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
Blow-off is factory set at 55-65 psig
Product Information Specifications for Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator Below:
Victor TurboTorch 0386-0814 245-03P Regulator Nitrogen Certified features nitrogen purging: When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxidation that results from heating the copper pipe. Without purging, oxidation will occur and the oxidized flakes that result can and will break off and flow through the system, damaging bearings and fouling system filters. All that is needed is a low pressure, low volume flow of nitrogen. The use of dry nitrogen gas also minimizes the need to evacuate moisture from the system. The process for this regulator is Oxy-Acetylene Components and is for use on high capacity and HVAC applications. The range for the gauges is 600 to 4,000 PSIG and the delivery range is from 0-500 PSIG.
Uniweld 40002 Nitrogen Sludge Sucker and Blaster Kit with Metal Carrying Stand for 40 Cubic Feet Nitrogen Tank
Uniweld 40002 Nitrogen Sludge Sucker & Blaster Kit (Max. Delivery Pressure 175 PSI) with Metal Carrying Stand for 40 Cubic Feet Nitrogen Tank Nitrogen is a dry inert gas with multiple uses in the HVAC/R industry. The Nitrogen Sludge Sucker & Blaster Kit was specifically designed for the following applications: Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale. Scale left inside the tubing can cause blockage within the TXV Valve and other A/C system components. Pressure testing a system for leaks prior to pulling a vacuum and charging the system with refrigerant will save time and money. Cleaning a condensate drain line is easy with the use of a Sludge Sucker or Sludge Blaster The Sludge Sucker is a tool that was developed to clean out a condensate drain line without having to access the drain pan located in the A/C System's Air Handler. The Sludge Sucker's clear vinyl hose is attached to the 3/4-Inch PVC condensate drain line on the outside of the building. With the use of Nitrogen, CO2 or water suction is created that pulls all the sludge and algae from the drain pan and drain line; then blows it onto the ground outside. The Sludge Blaster is inserted into the drain line (Pipe Capacity: 3/4-Inch to 1-Inch) and expands inside the pipe with the use of nitrogen pressure blasts the sludge and algae free. Capabilities can be expanded with rubber plug adaptors, needle tip, air chuck and accessories purchased separate...
Forney 87801 Acetylene Regulator Adaptor, CGA 520 To CGA 200, B Tank to Regulator, 40-CF
The Forney 87801 Tank to Acetylene Regulator Adaptor is used to convert a CGA-520 "B" 40 cubic feet (CF) acetylene tank to a CGA-200 "MC" style acetylene regulator. This adaptor is solid brass. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. We're committed to your success regardless of location size or needs. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
AGPTEK Oxygen Acetylene Flashback Arrestors Set Regulator End 9/16 -18 Threads B Size
Never connect a torch to acetylene and oxygen tanks without installing a set of flashback arrestors in the hoses at the regulators. Without these safety devices, it is possible a flash can occur within the hose, and ultimately follow back into the tanks, causing an explosion. This would be an extremely rare occurrence, but flashback arrestors will make it a "never" occurrence. Check valves are only a first line of defense and may not ultimately stop a flashback. Only the flashback arrestors will.
Uniweld RHP500 is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-500 PSI for purging and pressure testing air conditioning and refrigeration systems. Regulator with CGA580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI (Part No. G7SD) and Delivery Gauge 0-600 PSI (Part No. G8SD) with protective rubber gauge boots (Part No. GB20S). For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Regulator can be used with CO2 with the Uniweld part no. F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Uniweld FV600 oxy/fuel adapter is a fuel valve adapter that is used to connect a Uniweld acetylene MC regulator (CGA200) to a disposable fuel cylinder (CGA600). All Uniweld acetylene regulator diaphragms and seals are capatible for use with either propylene (MAP//Pro) or propane fuel gas. Warning: Fuel compatibility with other manufacturer's acetylene regulators must be determined prior to use. The Uniweld 71 welding handle and Type17 weld/braze tips will work properly using either of the fuel gases combined with oxygen. The CA550 cutting attachment will also work with wither fuel gas. However, the cutting tip is fuel specific and must be changed. Also, Uniweld's Cap'n Hook tips are fuel specific. It is recommended to use grade "T" hose (part# H32AT) with propylene (MAP//Pro) or propane fuel gas. If using grade "R" hose (part# H32A) with propylene (MAP//Pro) or propane fuel gas, it must never be used in extremely cold temperatures below -10 deg F. This may cause the fuel gas to liquefy and act as a solvent that will attack the internal hose material. Always bleed off the remaining fuel gas in the hose after each use. NOTE: There will be a noticeable performance and temperature difference when using propylene (MAP//Pro) versus acetylene and an increase in oxygen consumption. Acetylene burns at 5589 deg F with an oxy/fuel ratio of 1-1 respectively. MAP//Pro burns at 5193 deg F with an oxy/fuel ratio of 3.5 - 1. Propane burns at 4579 deg F with an oxy/fuel ratio of 4 - 1. It is ...