Standard issue Soldering Iron Holder for Pencil style soldering irons. Dual coiled springs to protect users and work from burns and damage. Sponge for tip cleaning. Metal base for stability and durability. For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits
Manufacturer: AMERICAN TERMINAL SUPPLY
Brand: American Terminal
This spool of American Terminal AT-31604 Solder contains 4 ounces of 1/16" solder with a leaded rosin flux core. The 60% tin, 40% lead combination is perfect for jobs like fine electrical soldering which requiring lower melt temperatures. AlphaFry is the company that produces the product, Alphametals is the brand on the roll of solder.
The Adjustable Circuit Board Holder is ideal for clamping PCB for soldering, desoldering or rework. It features 2 adjustable grips on a retractable stand to accommodate various board sizes up to 198mm wide and up to 4mm thick. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position. The base of this rigid metal stand features four rubber feet to ensure stability.
Manufacturer: NTE Electronics, Inc.
Color: One Color
Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the "instant-action" wetting behavior. The high mobility and fast-spreading action of this flux results in more reliable production line soldering.
The Hakko 599B-02 is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering.
J-B Weld 8280 Original Professional Size Steel Reinforced Epoxy - 10 oz.
Manufacturer: J-B Weld
Brand: J-B Weld
J-B Weld Original Cold-Weld Formula Steel Reinforced EpoxyJ-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ÂºF when fully cured.Use on:AutomotiveBrickConcreteEpoxy and AdhesivesFiberglassMetalAnd moreInstructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.J-B Weld is proudly made in the USA
Onlyfire Universal Propane Tank Refill Adapter- 100% Solid Brass Regulator Valve Accessory for all 1 LB Tank Small Cylinders
ProductÂ introduction Onlyfire propane refill adapter works great for refilling 1 lb propane cylinders for your portable grills, heaters, torches, etc. There are instructions with this adapter. 1: Put your empty 1 lb cylinders in a freezer for a couple of hours. 2: Attach the coupler to your propane tank (5-40 lb tank). 3: Attach your 1 lb tank (fresh from the freezer) to the adapter. 4: Pick up your large tank and turn it upside down and rest it securely on the corner of your picnic table. 5: Open the propane valve and shut it off when the flow of liquid propane stops. 6: Turn everything right side up and remove the 1 lb cylinder. 7: Repeat as necessary. Pay attention to : 1:You need to turn your bulk tank upside down so liquid flows out of it. 2:You need to chill your empty tanks so that there is a lower vapor pressure in the empty tank than the bulk tank. 3:Your refilled tanks will not be totally full, but this is good because over filling can cause them to vent gas if left in a hot place. Features - propane tank refill adapter with male soft nose P.O.L.Â and female 1"x20 throwaway cylinder thread - Built in safety feature that will ensure you NEVER over-fill your smaller tank - Safest and easy to refill in seconds with NO TOOLS required - This adapter will allow you to use a small 1 LB propane cylinder with your standard BBQ Grill - Great for tailgaters, caterers, campers and anyone that cooks on the grill/has cookouts.
Anti-static solder pump with replaceable, non-stick nylon tip for all your DIY / Maker soldering and re-working needs. Solder pumps are used to clean heated, molten solder out of solder joints and contact points. They are best used when removing solder from PCB through-hole solder joints. This is for moderate and hobbiest use by do it yourself, in schools (great for use in STEM - steam curriculums ) and homes. Before there was the Maker movement, there was elenco with a maxim for learners and hobbiest everywhere, "learn by doing". it is the concept that goes before everything when we are designing and choosing the tools, testing equipment and educational kits we have been offering for 40 years. We strive for quality with value to make our products available for everyone.