OTC (6575) Hub Grappler Kit: The OTC 6575 is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This eliminates unnecessary alignments or the use of a shop press, cutting service time dramatically. The puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designs. 6 adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers. The application guide is the most comprehensive hub and bearing service guide on the market. Developed to be the first tool used in the kit, it provides quick reference to the other tools in the kit required to do the job, eliminating guesswork and saving time.
Color: United States
For separating ball joints, tie rods, pitman arms and other uses. Six tools in one for exceptional versatility and value. Kit consists of three forks and two handles, one for hammering, the other for use with an air hammer (.401 inch shank). All forks are threaded to interchange with either handle. Forks are heavy-duty forgings, handles are heat-treated alloy steel.
Lisle inner tie rod tool works on tie rods with inaccessible flats. Many inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends prevent access to the wrench flats. This tool utilizes five crows feet, to engage the wrench flats. Long socket slips over the tie rod end and connects to the crows foot. The inner tie rod can be removed and installed without removing the rack.
This listing is for a Inner Cam Bearing Puller and Installation ToolsDesigned for Twin Cam Models 2007 to Present.Dyna Models 2006 to Present.This set will remove and install the inner cam bearings on the 07 to Present Twin Cams and the 06 to Present Dyna.
The OTC 7894 works on 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup. Use with the 7249 ball joint set to remove or install aftermarket and original equipment, upper and lower ball joints, and the offset ball joints used to change caster/camber.
Manufacturer: Cooper Tools
GearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn't stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Having the right tool for the job is critical and technicians working in cramped spaces understand better than anyone the power of this simple statement. This wide range is the backbone that gives GearWrench its reputation for unprecedented speed, strength and access. The result is increased productivity for those who keep GearWrench tools in their box.
OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit
This OTC kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. The kit contains 3 receiver tubes (2-3/4 inch I.D. x 3 inch O.D., 2-1/4 inch I.D. x 2-1/2 inch O.D., and 1-3/4 inch I.D. x 2 inch O.D.) and 1 installing cup, 1 receiving cup, and 1 installing adapter.