The Wilmar W87127 2/3 Jaw Gear Puller, 5-1/2-Inch Reach X 7-Inch Spread, with heavy duty chrome vanadium steel construction, Heat treated jaws., fine thread center bolt for smooth operation. Plated to resist corrosion.
The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.
Tool will remove wheel hubs mounted on tapered axles and press fit rear brake drums. Can be adjusted by legs to an 8 inch diameter bolt circle. Made of alloy steel and drop forged, this heavy duty tool has a center screw with a 1-1/8 inch hex head.
The OTC 1023 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.
The OTC 8150 is designed to fit Pitman arms on domestic cars and light trucks. Spread is 1-1/2" with a reach of 2-1/2". 3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn Pitman arms. Conical design allows the puller to fit securely on the pitman arm.
Particularly useful during steering wheel removal when there are no tapped holes in the assembly. Designed for use with either the No. 7245 or No. 7403 OTC steering wheel puller. These legs get behind the steering wheel assembly to provide an even straight pull. The collar is designed for use on Ford and Chrysler vehicles. Works on 1988-1993 Pontiac LeMans 1997-newer GM cars SUVs and light trucks 1997-newer Ford SUVs and light trucks 1999-newer Jeep Grand Cherokee 2003-newer Jeep Liberty 2004-newer Dodge Sprinter van.
This Posi Lock 106 manual puller has a 10-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.62" (15.8 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 6" (152 mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsPuller3-jawPulling capacity10 tonsCenter bolt diameter0.62" (15.8 mm)Reach6" (152 mm)Spread range0.5 to 7 inches (13 to 178 mm)Maximum torque130 ft-lb. (176 N-m)Hex socket size0.75" (19 mm)Overall length13.32" (338.3 mm)Jaw width0.75" (19 mm)Weight8 lb. (3.6 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main partsâ€”the center bolt, gripping jaws, and T-handleâ€”and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and man...
5pc BLIND INNER INTERNAL BEARING PULLER SLIDE HAMMER SET
Manufacturer: PMD Products
Brand: PMD Products
2lb Slide Hammer (950grams) Bearing Extractor Collets With Internal Capacity From 0.450" (11mm) To 1.260" (32mm) Drop Forged Steel One Slide Hammer Assemble & Clamp .Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm) Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm) Bearing Extractor 3: 5/8" to 1" (18mm-25mm) Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm) Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts