Blade Holder and 30/45/60 Degree Blade for Cutting Plotter Vinyl Cutter ,16 Pics
Holder pen Features: 12mm cutting plotter pen holder Cutting plotter vinyl cutter pen holder Note:please check if it fits your machine before order this product ! Blade Features: Compatible with Roland, Refine, Rabbit(HX) , Redsail(RS) , Yinhe(YH), Ruijie(RJ), etc. Standard Blade for cutting color adhesive media -standard vinyl. Suitable for cutting media up to 0.25mm thick Standard Blade for cutting color adhesive media -standard vinyl. Suitable for cutting media up to 0.25mm thick Blade size: 23mmÂ±1mm (Length) x 2mm (diameter) Knifepoint Offset: 0.25mm Angle: Angle: 30/45/60 Degree
Heavy-gauge steel crimping tool designed for insulated wire terminals. Ratcheting action crimps terminal to correct tightness on the wire, making crimping fast and easy. Insulated handles with compound mechanical leverage for power. For wire sizes: AWG 22-18 (0.6 millimeter-1.0 millimeter) red terminal; AWG 16-14 (1.3 millimeter -1.6 millimeter) blue terminal; AWG 12-10 (2.0 millimeter-2.6 millimeter) yellow terminal.
TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE. The lower portion of the tap guide should remain as square as possible to the engine surface. Turn the tap slowly while making sure the guide remains flush. Tap Guide M6x1.0
CTA Tools 8230 Thread Restoring File Set - 4 Piece is designed to restore damaged threads on bolts and shafts. Files are crosscut and depth proportional to the thread pitch, so they will not skip or jump out of fine pitches. All 4 files are 7/16-Inch square by 8-3/8-Inch long. The file types and pitch sizes are as follows: (number:8231) Metric 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00-millimeters; (number:8233) SAE 11, 12, 13, 14, 16, 18, 20, 24 TPI (threads per-Inch); (number:8235) SAE 9, 10, 12, 16, 20, 27, 28, 32 TPI. The set also includes a single blade file (number:8237) that can renew all 60-Degree threads, including metric. Heavy-duty construction allows for strength and durability. Whether tuning up your â€˜68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Allstar Safety Wire Drill Fixture features a safety wire fixture that allows accurately drilled holes in fasteners so they can be mechanically locked in place with safety wires. The fixture accommodates 3/16 inches, 1/4 inches, 5/16 inches., 3/8 inches, 7/16 inches, 1/2 inches and 5/8 inches fasteners. The guide bolt tightens against fasteners, holding it secure for drilling and has two 1/16 inch bits which store conveniently in the fixture. It is backed by a 90-day limited factory warranty and is sold individually.
TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE. The lower portion of the tap guide should remain as square as possible to the engine surface. Turn the tap slowly while making sure the guide remains flush. Tap Guide M10x1.5