EBUSBAR Portable EV Charger with plug NEMA 10-30 Built by Ebusbar, the Level 2 home charger can make charging your electric vehicle as easy as charging your cell phone. Key Features - Compatible with all EVSE standards and recommended practices, including SAE J1772, NEC 625, UL 2231 and UL 2594. - Built-in communication verifies proper connection before charging can commence. - Voltage 240V with plug NEMA 10-30 which is compatible with dryer's outlet. - output current 16A. - Reliable design including water proof, leakage protection, over-voltage protection and over-current protection. - Cord length 17 feet. - 12 months warranty from manufacture Package Include - Ebusbar BEV-H02A10 Level 2 EV charger - Portable zipper case - User's manuall Supported Vehicles - Nissan Leaf - Chevrolet Volt - VW e-Golf - Ford C-max - Toyota Prius Plug - Fiat 500e - BMW i3 - Tesla model S - Other vehicles follow standard SAE J1772 If need the type with NEMA 14-30 plug (4 prong), please check http://www.amazon.com/dp/B01EBBH4S4
NOTE: For use in North America, not for international use. The HCS-40 hardwired 32 Amp Electric Vehicle Charging Station from ClipperCreek is designed to take the wear-and-tear of everyday use in all environments. Its tough NEMA 4 outdoor rated enclosure ensures you can install this EV Charging Station indoors or outdoorsÂ with confidence. ELECTRICAL SPECIFICATIONS Service: 208V to 240V - 40A, dedicated circuit Charge current output power: 208V to 240V, 32A max Service ground monitor: Constantly checks for presence of proper safety ground Automatic circuit reclosure after minor power faults Charge Circuit Interruption Device: Ground fault protection with fully automated self-test eliminates manual user testing MATERIAL SPECIFICATIONS Indoor/outdoor rated fully sealed (NEMA 4) enclosure Operating Temperatures: -22Â°F to 122Â°F (-30Â°C to 50Â°C) 9'' W x 19.7'' H x 5.3'' D (229mm W x 493mm H x 135mm D) Installation: Hardwire 25 feet charging cable - standard Lockable SAE J1772 Connector; Lock & Keys Included Wall Mount J1772 Connector Holster Included ETL Listed CODES, STANDARDS and RECOMMENDED PRACTICES UL 2594 Electric Vehicle Supply Equipment UL 2231 Personal Protection Device (i.e. CCID Hardware) UL 1998 Standard for Safety-Related Software NEC 625 Electric Vehicle Charge System Lockable SAE-J1772TM Electric Vehicle Conductive Charge Coupler Please refer to the Help section of our storefront to view our return policy and other information.
Siemens VC30GRYHW Versicharge 30-Amp electric vehicle charger Siemens VersiCharge Electric Vehicle Chargers Founded more than 165 years ago, Siemens is a worldwide industry leader in electronics and electrical engineering, dedicated to innovation, quality, and reliability in the fields of energy, industry, and healthcare. Standing for technological excellence and delivering infrastructure solutions, Siemens is the worldâ€™s chief supplier of environmental technologies, with about 40 percent of its total revenue coming from green products and solutions. VersiCharge is just one more best in class product in the green energy sector to be developed by Siemens. VersiCharge is available in plug in (VC30GRU) and hard wired options (VC30GRHW) VersiCharge makes it easier than ever to incorporate energy efficient practices into your home VersiCharge Selection The Siemens 30-A Level II VersiCharge electric vehicle charger is available in two configurations â€“ Hardwire for indoor use only (VC30GRYHW) and Universal which can be used indoors and outside (VC30GRYU). The Universal unit arrives ready to plug in for use into a 240V receptacle and is easily attachable to most surfaces with the provided mounting bracket. Charging Convenience Most EV batteries will be charged from zero to full in less than 3.5 hours, leaving plenty of time to delay your charge by 2-8 hours with the easy to use time of charge delay feature on the unit. Additional features like the status indicating LED Halo visible from a distance and a clean cord management solution will leave you even more satisfied when you get into your fully charged EV every day. Choose Whichever Installation is Right for You The Universal VersiCharge is equipped with a plug and cord assembly which can either be plugged into a suitably sized double-gang receptacle below or behind the unit. The plug and cord assembly can be detached from the unit for a hardwired installation. For an indoor only hardwire application, we recommend the more cost effectiv...
AeroVironment TurboCord 240 Volt Plug-In EV Charger, UL-Listed
Manufacturer: AeroVironment, Inc.
AeroVironment's TurboCord/240 fits in the palm of your hand and is powerful enough to recharge 3x faster than your standard Level 1 cord set. Supplied with a lightweight easy to handle 20ft charging cable, it's a perfect companion for charging your PHEV or BEV at home or away. Because TurboCord plugs in, installation costs are significantly lower than hardwired units, but with the added bonus of being able to easily take it with you. Not only does the direct plug-in feature make it portable but the unit doesn't use valuable wall space in your garage. Since charging is significantly faster, you'll be able to drive more electric miles with your Plug-in Electric Vehicle. TurboCord has been rigorously designed and tested to meet strict internal and automotive quality standards. It is listed and safety certified by UL, a leading Nationally Recognized Testing Laboratory. AeroVironment is the choice of thousands of drivers and the preferred charger brand for auto manufactures including Nissan, Ford, FIAT, Kia, and Mitsubishi
JuiceBox 40A EV Charger / Home Level 2 Electric Vehicle Charging Station (EVSE) with 24' Cord
Manufacturer: Electric Motor Werks, Inc.
Color: Gloss Black
JuiceBox(R) 40 is our most powerful basic charging package. JuiceBox 40 is ready to plug into any NEMA 14-50 outlet, and it works with all production EVs on the road today. It offers faster charging and a set of advanced safety and compliance features. It is perfect for customers who might have a more powerful onboard charger in their vehicle or who wish to future-proof their EVSE in anticipation of owning a larger-battery EV in the years ahead. JuiceBox 40 is designed with safety and durability in mind; featuring GFI, stuck relay protection, charging interlock, temperature monitoring, and power detection. The unit is small and lightweight, and can be removed in seconds from its mounting bracket for road trips. JuiceBox is indoor/outdoor rated, with a sturdy aluminum IP66 and UL rated enclosure. In the package, you will receive: 1. JuiceBox unit, ready to plug in and begin charging 2. An aluminum quick-release mounting bracket 3. A black J1772 plug and cable holder 4. An instruction pamphlet and warranty card Car models JuiceBox 40 is known to work well with: ALL production EVs, including: Audi A3 e-Tron, BMW i series, BMW PHEVs, Cadillac ELR, Chevy Bolt, Chevy Volt, Chevrolet Spark EV, Fiat 500e, Ford C-Max Energi, Ford Focus Electric, Ford Fusion Energi, Honda Accord Plug-in Hybrid, Kia Soul EV, Mercedes S-E line, Mercedes B-Class Electric Drive, Mitsubishi i-MiEV, Nissan LEAF, Porsche Plug-in Hybrids, Smart Electric Drive, Tesla Model S, Tesla Model X, Tesla Model 3, Toyota Prius Plug-in Hybrid, Toyota Prius Prime, Volkswagen E-Golf, Volvo PHEVs. All other makes and models will be compatible as well, as JuiceBox utilizes a standard J1772 charging protocol adopted by all EV manufacturers and has many years experience supporting tens of thousands of installed stations across the world.
The ORIGINAL evCHARGEsolutions J1772 Connector Holster Dock for EVSE Electric Vehicle Charger Plug Holder Storage
Looking for the perfect way to store your electric vehicle charger in a safe and organized manner? The original SAE J1772 charger holster from evCHARGEsolutions will do just that! Mount this holster on the wall or charging station to store your J1772 connector, keeping it clean, out of the elements and off the ground. The injection-molded holster provides a heavy duty and convenient place to park your charger while not in use. The evCHARGEsolutions plug holder is designed to support all J1772 charger types. It is produced through injection molding to create a strong and heavy duty holster. Beware of competitors' 3D printed charger holders as they are brittle and will not hold up to regular use. The durable evCHARGEsolutions holster is built to last and is lifetime guaranteed!