Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set
Easily disconnects air conditioning lines and quick connect fuel lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16 inch size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch.
The IPR Socket for Ford Diesel is used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines. The Injector Pressure Regulator is located in a very tight location. This Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused.
Titan Fuel Line Disconnect Tool is useful for the fast and easy separation of quick disconnect style fittings. It is for use on both 5/16 inch and 3/8 inch fuel lines with quick disconnect fittings. It is necessary for fuel filter replacement and service on many late model vehicles. It is for use on many applications including: GM: 1989 through the current Ford: 1990 through the current Mazda: 1990 through current. It has slide card packaging.
The 90 degree grease coupler is for use on hand-operated grease guns only. It is designed for hard-to-reach grease fittings on cars, trucks, farm equipment and is ideal for lubrication of front and all-wheel drive vehicles. It has quick connect, a spring loaded sleeve that locks coupler in place for angular applications, and is zinc plated for maximum protection against corrosion. It has a recommended working pressure of 3,000 PSI, a maximum operating pressure of 4,500 PSI, and comes complete with small and large quick-disconnect adapters to fit standard couplers.
The Alltrade 10 piece Bearing Race and Seal Installer Kit separates fittings on automotive fluid lines, including AC, fuel, oil and transmission lines. Kit works on most late model GM, Ford and Chrysler vehicles. Includes single piece driver handle as well as 9 discs in the following sizes: 3.18 inch, 2.995 inch, 2.83 inch, 2.559 inch, 2.48 inch , 2.32 inch , 1.965 inch , 1.75 inch, 1.555 inch.
Manufacturer: General Tools
Brand: General Tools
Overall Size: 7-19/32" Long X 1-13/64" Dia.Ideal For Detecting Leaks Of Natural Gas (Methane), Propane Or Butane From Plumbing And AppliancesSensitive, Reliable And Easy To UseFast Response Time, Under 5 SecondsDifferent Alarms For Leaks, Sensor Faults And Low BatteryAutomatically Sets Zero Measurement Baseline Upon Startup In Fresh AirNatural Diffusion Sampling TechniquePower Source: 2 AA Batteries (Included)Comes With Wrist Strap And Instruction Booklet
Color: United States
Disconnects spring lock couplings on Ford and Chrysler AC lines. Works on fuel lines and other quick disconnect couplings on domestic and import vehicles. The handles are angled to access tight spots. Made of durable plastic that resists fuels and solvents. Available in six sizes as 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch. All disconnects available in individually skin-packed.
Manufacturer: General Tools & Instruments
Brand: General Tools
General Tools & Instruments PNG1 Combustible Gas Detector is ideal for detecting natural gas (methane), propane or butane from tanks, plumbing and appliances. This handy pen type gas detector is a necessity for every household. Features different alarms for leaks, sensor fault and low battery. It is sensitive, reliable and easy to operate. Fast response and fast resume < 5 seconds. Automatically sets zero measurement baseline upon startup in fresh air. Redundant visual and audible alarms. Double molded hand grip. Range is 0 to 100 percent LEL (Lower Explosive Limit). Low alarm (20+/-5)% LEL to (50+/-5)% LEL. High alarm > (50+/-10)% LEL. High/Low Audible Alarm Levels > 65dB. Sampling technique is natural diffusion. Operating temperature is -4 to 131 degrees Fahrenheit (-20 to 55 degrees Celsius) at
â€¢ Open Air Flow. Air flows freely through the chuck even though the tire valve is not engaged. â€¢ Works without a valve core.1/4" NPT (National pipe thread): â€¢ Pipe Outside Diameter (OD): 0.54" â€¢ Approx. Thread Length: 5/8" â€¢ Approx. Thread Length, Hand & Wrench: 3/8" â€¢ Thread Pitch: 0.05555555" â€¢ Tap Drill: 7/16" â€¢ Thread Density:18
The drip pan measures 18 inches x 25 inches x 1/2 inches, is constructed of rust resistant, heavy gauge galvanized sheet metal, has rolled smooth edges for extra strength, and keeps garage, driveways or automotive show-room floors safe and clean from fluid drippings.