AMPRO T70046 A/C Fuel Line Spring Lock Coupling Tool
Manufacturer: Builders World Wholesale Distribution
The AMPRO T70046 A and C Fuel Line Spring Lock Coupling Tool is for Ford sizes A=3/4 inch , B=5 and 8 inch , C=1 and 2 inch , D=3/8 inch . The T70046 Coupling Tool easily releases locking couplings on fuel and air conditioning lines. Please use on FORD 1981 to current and Chrysler LH series. Release system pressure before using this tool.
OTC (7337) Fuel Line Disconnect Tool Set for Ford - 2 Piece
The OTC 7337 will easily disconnect the spring lock couplings of fuel lines on Ford's throttle body and port fuel injection systems. The tools are spring-loaded and durable, and they enclose the line to help deflect spray. The tools fit 3/8" and 1/2" lines.
Astro Pneumatic's disconnect tool set allow the best and quickest way to disconnect spring lock couplers and separate fittings on fuel lines, fuel filters and fuel tank return lines. The quick disconnect coupler tool slides down the line and into the connector separating the clip apart without damaging the quick connect seals allowing removal of clip. Also separates automatic transmission oil cooler lines on Ford Taurus and Escort with AXOD and ATX transmissions. Set sizes includes: 1/4", 5/16", 3/8" and 1/2" disconnect tools.
Schley (SCH99100) Cummins 3/4 Inch Fuel Injection Flare Nut Socket
The area surrounding the injection pumps on later model 4 valve ISC 8.3 liter and ISB 5.9 liter engines is very difficult to access when removing the fuel supply lines. This specialty socket has been designed with a custom slim configuration and a 3/8" square drive to fit into this confined area. This unique 3/4" Fuel Injection Flare Nut Socket gives the technician the ability to access and remove fuel pump lines with little effort. Used with a ratchet and extension, the socket slides along the fuel line onto the flare nut which now can be loosened for pump removal. The Flare Nut Socket is also used to tighten the fuel line nuts when the injection pump isreattached to the fuel lines.
CTA Tools 3478 Ford 6.0-Liter Oil Line Disconnect Tool is designed with special openings and an offset head to allow the high-pressure oil rail supply line to be disconnected from the fuel rail when removing fuel injectors. The applications for the 3478 include 2003 and newer F-Series and Excursions with diesel engines. The overall length of this product is 6.5-inches or 16.5-centimeters. Whether tuning up your â€˜68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Special low-profile design works in close quarters on GM Ford and Chrysler vehicles where there is limited clearance between the fuel line fittings and fuel filters fuel rails or sending units. The tool is designed to access the center port on the GM fuel tank sending unit. For 3/8" and 1/2" applications. Will also service 2001 - current 3/4- and 1-ton trucks with the Duramax diesel engines.
OTC 6770 Diesel Service Tool Kit for Ford 6.0L Engine
Due to popular demand - OTC has kitted their selection of 6.0L Diesel Power Stroke Tools - combining OTC value with the convenience of storage. The tools included in the OTC , help you diagnose pressure problems often associated with no starts and help you remove and replace common components like IPR's or EGR's, oil lines, glow plug harnesses and injector harnesses. No need to go digging through your toolbox - it's all right here in this kit. This Ford 6.0L Diesel Service Tool Kit bundles the affordable value of our time saving tools with convenient storage. Vehicles with the 6.0L Diesel platform have an enduring duty cycle and are still relied upon in medium duty truck applications today. Your ability to service these platforms is yet another revenue stream for you and your service facility. This handy kit includes; fuel filter cap wrench, glow plug and injector harness release tools, oil line disconnect tool, EGR removal tool, IPR controller, IPR socket tool and fuel rail pressure adapters.