STEELMAN Mini EngineEAR is a unique diagnostic listening device specifically designed to pin-point squeaks, rattles and any other troublesome noises in faulty fuel Injectors, bearings, gears, suspension components, transmissions, and differential/CV joints. Sensor clamp helps to detect noises during test drives that can not be duplicated in the work bay. Sensor tip mounted on 6-inch flexible shaft allows access to hard-to-reach areas. 5-inch inductive metal probe allows user to pin-point source of noise and vibration. Ultra sensitive microphone provides a full range of sound. Rotary volume control allows user to easily adjust sound level. Earbud style earphones provide excellent sound quality.STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
The ABN Serpentine Belt Tool Kit is the perfect tool for the professional tech or the DIYer. This kit includes all of the needed tools for the removal and install of the serpentine belt. On the recommendations of our techs we have included two short extensions, which allow for much easier access on late model Ford and GM models. Applications include: 3/8" Drive 13mm crowfoot wrench for GM Quad Four Engine 3/8" Drive 14mm crowfoot wrench for Saturn Engine 3/8" Drive 15mm crowfoot wrench for Ford Windstar 3.8L Engine 13mm socket (on handle) for late model quad four engine 14mm socket 1.9 Saturn 15mm socket GM and Chrysler 16mm socket Ford 3.8L & Ford 4.0L 18mm socket GM 3800 Engine 1/2 square drive ratchet 3.1L GM 1/2" square drive socket late model GM and Ford short extension allowing for easier access
Belt tension gauges are used to properly check drive belt tension on drive belts to ensure maximum belt and bearing life. the scale reads 30â€“180 inch pounds. all you need is a handy universal belt tension gauge and the OTC family of belt tensioning tools.
J-B Weld 8270 KwikWeld Industrial Professional Size - 10 oz.
Manufacturer: J-B Weld
Brand: J-B Weld
J-B Weld KwikWeld Quick Setting Steel Reinforced EpoxyJ-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F.Great for:Household RepairsAutomotivePlumbingMarineCrafts and MoreUse on:AutomotiveBrickConcreteFiberglassMetalAnd moreInstructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 6 minutes. Cures 4 hours. If temperature is below 40 degrees F, then set time is longer.J-B Weld is proudly made in the USA
The STEELMAN ChassisEAR allows user to listen to up to six different locations in one road test and hear noises that cannot be duplicated in the stall. Professional headphones shut out surrounding sound. Six color-coded, ultrasensitive microphone clamps attach to the problem area with 16 ft. wire leads that can reach to all vehicle locations. Clamp the six sensors on to springs, torque rods, shocks, body mounts, brakes, dash assembly, door hinges, drive train, rear or front axle, transmission, transfer case, suspension, sway bars, tie rod ends, struts, axle hubs, ring and pinion bearings, mufflers, catalytic converter, O2 sensor, oil pump or even an un-torqued bolt.STEELMAN is an industry leader in automotive and industrial specialty tools and equipment, manufacturing the highest quality, unique, and innovative tools and products, designed to meet the specific needs of mechanics, contractors, and other working professionals.
â—Customer Serviceï¼š 1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time). 2. We will reply your message within 24~48 hours. â— Shippingï¼š 1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours. 2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day. 3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States. â—30 Days Money Back Guaranteeï¼š 1. Customer MUST contact us within 30 days after the purchasing. 2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition. 3. Buyer should be responsible for the return freight. 4. 20% restocking fee is NON-REFUNDABLE under any circumstances. â— Warrantyï¼š 1. Most of items which were marked "warranty" on the selling page apply to the warranty policy. Some item is not included. 2. Warranty period: 1 year 3. The warranty only covers the defects under normal use. 4. The warranty DOES NOT cover the defect was subjected to misuse, negligence or accident. 5. The warranty DOES NOT cover consumable parts. 6. EWK reserves the right of final decision.
This is used on front wheel drive vehicles. It replaces the existing strut and allows the engine to be tilted forward to access spark plugs, distributor, ignition coils, rack and pinion steering gear, power steering hoses, etc. This gives a safe and secure hold while the motor is tilted for better access. It's easy to use and install!