Lang Tools (5238) Master Power Steering Pulley Remover and Installer Set
Brand: Lang Tools
Made in the USA, Lang Tools (5238) Master Power Steering Pulley Remover and Installer Set is designed to remove and install press-on-type belt-driven accessory pulleys found on most major domestic vehicle platforms. This set includes components necessary to use on pumps with the common 3/8â€-16 threaded shaft. Applications include: GM Quad 4, GM 3.1L, and Ford 4.6L engines.
Universal design fits many different size pulleys having slots or holes such as camshaft pulleys or crankshaft pulleys. Wrench is adjustable from 1-1/2" to 8-5/8"; four different size step pins are interchangeable. Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts.
Valve Stem Seal Removal Pliers - Narrow AccessFeatures: These pliers have been developed to remove the valve stem seals which are used on most overhead camshaft engines which includes 4 valve per cylinder engines that have very narrow access to the valve stem seal due to the design of the heads. These pliers feature "gripping" serrations in the tip allowing them to grasp both original equipment and aftermarket seals regardless of their configuration. The pliers are made from quality heat-treated steel and come with easy grip handles.
This easy to use and read tool allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 pounds specification. Instructions: 1. Position the small O-ring over the 10 pounds mark. 2. Position the U-shaped belt cradle against the bottom of the belt at a 90 degree angle and locate the large O-ring to a reference point, record reading. 3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point; difference in the reading is the belt deflection. Refer to service manual for specifications.
Integrated low profile handle allows you to easily remove your crank pulley with the radiator still in the car. Comparable to both factory tools #499977100, #499977400 and #499977300. Works with â€¢ 93-11 Impreza â€¢ 98-09 Forester â€¢ 94-09 Legacy
Lisle 22100 Flywheel Locking Tool for 6.6L Duramax
Locks Flywheel in place when removing harmonic balancer on 6.6l duramax engines with Allison automatic transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.
ABN Volvo Camshaft Crankshaft Engine Alignment Timing Locking Fixture Tool Set Kit
Manufacturer: Auto Body Now
ABN Crankshaft Camshaft Engine Alignment Timing Locking Tool Volvo Fixture KitÂ ABN Volvo Camshaft Crankshaft Engine Alignment Tool Timing Set Kit for (4), (5), (6) Cylinder EnginesThis ABN Volvo Camshaft/Crankshaft Kit is designed for alignment of the cam and crankshafts on Volvo vehicles. It also enables the correct installation of the camshafts with the cam cover. This master set is designed to properly secure and align the cylinder head, cam, and crankshaft during the removal and installation of cylinder head assemblies on (4), (5), and (6) cylinder engines.Â Applicable for Volvo models: 850, 960, S40, S70, and S90.Â Master Set for Crankshaft, Crankshaft, and Timing AlignmentPrecision ade fitting to ensure proper alignmentWorks with Volvo Models: 850, 960, S40, S70, and S90For either (4), (5), and (6) Cylinder EnginesFormed Carrying Case for Tool Protection