Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills
MALCO HANDHELD TURBO SHEAR Attaches to a standard 1200 rpm A/C or cordless drill to create a power shear Cuts straight and to the left in heavy 20 gauge galvanized steel Use on ferrous and non- ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets Clamshell The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.
Use to remove windshields, backlights and bonded backlights on General Motors and Chrysler vehicles. This tool cuts the adhesive caulking compound around windows with special tempered steel blades. Make windshield removal an ease with this tool!
Quick loading. No maintenance - 2 moving parts. Fits tape 3/4"-2" and paper 3"-18" wide. Contains: 1 - 1-6" blade and 1 - 1-6" extension. For best results use "3M 2050" or "2090" masking tapes. Protects surfaces against damage caused by paint runs, drips, roller mist and over spray. Feeds tape and paper directly to work surface. Hand held-lightweight.
This easy to use, inexpensive Glue Puller Kit allows for simple, cost efficient removal of small to medium dents/dings on all panels of your vehicle. More and more, light gauge sheet metal is being used in the construction of vehicles. You can actually dent many new cars by simply leaning against them. Dent Out Glue puller kits allow the do-it-your-selfers, a professional option to expensive dent removal services. No need to access the underside of the panel. Each unique kit offers a tool for specific damage. With three kits available, they encompass all types of dent repair. Simply apply a bead of glue to the pulling nib and affix the nib to the lowest area of the dent. The tool slips over the threaded stud. A wing nut tool is threaded down pulling the metal up. Once the dent is pulled out, a couple of drops of release agent is applied to the glue and the pulling nib comes right off. Use only on OEM baked finishes. This product will not damage your factory finish.
Recommended for spray paint applications, with maintenance free design for convenience Designed to be truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent
Mothers PowerBall Polishing Tool features the Mothers PowerBall which is the original foam polishing tool designed to revitalize billet, diamond plate, polished aluminum and stainless steel. It is ideal for use with aluminum, billet and chrome polishes. It has unique and durable construction compresses to fit tight spaces, so polishing difficult, intricate metalwork to a mirror-like finish is fast and easy.